RankRizz
JEE MAIN 2017 · 02 APR OFFLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2017 Physics question — Thermal stress

An external pressure PP is applied on a cube at 0°C so that it is equally compressed from all sides. KK is the bulk modulus of the material of the cube and α\alpha is its coefficient of linear expansion. Suppose we want to bring the cube to its original size by heating. The temperature should be raised by:

SOLUTION

We begin with the cube at an initial temperature of 0∘C0^{\circ}C and at its original volume V0V_0. An external pressure PP is applied uniformly from all directions, so the cube is compressed equally on all sides.

First, we recall the definition of the bulk modulus. The bulk modulus KK of a material is given by the formula

K=− PΔVV0K = -\,\frac{P}{\displaystyle\frac{\Delta V}{V_0}}

where ΔV=V−V0\Delta V = V - V_0 is the change in volume caused by the pressure PP. Because the pressure compresses the cube, the change in volume is negative, so we may write

ΔVV0=− PK.\frac{\Delta V}{V_0} = -\,\frac{P}{K}.

Hence the fractional decrease in volume produced by the pressure is

∣ΔVV0∣=PK.\left|\frac{\Delta V}{V_0}\right| = \frac{P}{K}.

Next, we wish to restore the cube to its original size by heating it while the same pressure PP continues to act. For an isotropic solid, the coefficient of linear expansion is α\alpha, so the coefficient of volume expansion is

β=3α.\beta = 3\alpha.

If we raise the temperature by an amount ΔT\Delta T, the fractional change in volume produced by thermal expansion is

ΔVthermalV0=βΔT=3αΔT.\frac{\Delta V_{\text{thermal}}}{V_0} = \beta\Delta T = 3\alpha\Delta T.

To bring the cube back to its original volume, the volume increase produced by heating must exactly cancel the volume decrease caused by the applied pressure. Therefore we set

3αΔT=PK.3\alpha\Delta T = \frac{P}{K}.

Solving for ΔT\Delta T, we obtain

ΔT=P3αK.\Delta T = \frac{P}{3\alpha K}.

This is the temperature rise required for the cube to regain its original size under the continued external pressure PP.

Hence, the correct answer is Option 2.

Tagged Thermal stress. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicThermal stress
TypeMultiple choice