RankRizz
JEE MAIN 2019 · 12 JAN S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2019 Physics question — Stress, strain, Hooke's law and Young's modulus

A load of mass M kg is suspended from a steel wire of length 2m and radius 1.0 mm in Searle's apparatus experiment. The increase in length produced in the wire is 4.0 mm. Now the load is fully immersed in a liquid of relative density 2. The relative density of the material of load is 8. The new value of increase in length of the steel wire is:

SOLUTION

In Searle’s apparatus the extension in the steel wire is obtained from Young’s modulus formula

ΔL=F LA Y\Delta L=\frac{F\,L}{A\,Y}

where ΔL\Delta L is the increase in length, FF the tensile force in the wire, LL the original length, AA the cross-sectional area and YY Young’s modulus of steel. For a given wire L,  AL,\;A and YY are fixed, so the extension is directly proportional to the applied force:

ΔL  ∝  F\Delta L\;\propto\;F

Initially the wire supports the load in air only. The force is simply the weight

F1=M gF_1 = M\,g

and the corresponding extension is given as

ΔL1=4.0  mm\Delta L_1 = 4.0\;\text{mm}

Now the load is completely immersed in a liquid. The liquid exerts an upthrust (buoyant force) that reduces the effective weight. We determine this buoyant force step by step.

The relative density (specific gravity) of the load is 8, so its density is

ρload=8 ρwater\rho_{\text{load}} = 8\,\rho_{\text{water}}

The relative density of the liquid is 2, so the liquid’s density is

ρliq=2 ρwater\rho_{\text{liq}} = 2\,\rho_{\text{water}}

The volume of the load is

V=Mρload=M8 ρwaterV = \frac{M}{\rho_{\text{load}}} = \frac{M}{8\,\rho_{\text{water}}}

The buoyant force equals the weight of the displaced liquid:

Fb=ρliq V g=(2 ρwater)(M8 ρwater)g=28 M g=14 M gF_b = \rho_{\text{liq}}\,V\,g = (2\,\rho_{\text{water}})\left(\frac{M}{8\,\rho_{\text{water}}}\right)g = \frac{2}{8}\,M\,g = \frac{1}{4}\,M\,g

Hence the apparent (effective) weight of the load while immersed is

F2=F1−Fb=M g−14 M g=34 M gF_2 = F_1 - F_b = M\,g - \frac{1}{4}\,M\,g = \frac{3}{4}\,M\,g

Because extension is proportional to force, the new extension ΔL2\Delta L_2 satisfies

ΔL2ΔL1=F2F1=34M gM g=34\frac{\Delta L_2}{\Delta L_1} = \frac{F_2}{F_1} = \frac{\frac{3}{4}M\,g}{M\,g} = \frac{3}{4}

Substituting ΔL1=4.0  mm\Delta L_1 = 4.0\;\text{mm}, we obtain

ΔL2=34×4.0  mm=3.0  mm\Delta L_2 = \frac{3}{4}\times 4.0\;\text{mm} = 3.0\;\text{mm}

Hence, the correct answer is Option D.

Tagged Stress, strain, Hooke's law and Young's modulus. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicStress, strain, Hooke's law and Young's modulus
TypeMultiple choice