The steel ruptures when the shear stress reaches 3.5×108 N m−2. To punch a hole, we need to apply a force that causes this shear stress over the area being sheared.
When punching a hole of diameter 1 cm in a sheet of thickness 0.3 cm, the sheared area is the lateral surface area of the cylindrical hole. This area is calculated as the circumference of the hole multiplied by the thickness of the sheet.
First, convert all measurements to meters for consistency. The diameter is 1 cm, which is 0.01 m, so the radius r is half of that: r=20.01=0.005 m. The thickness t is 0.3 cm, which is 0.003 m.
The circumference of the hole is 2πr. Therefore, the sheared area A is:
A=2πrt
Substituting the values:
A=2×π×0.005×0.003
First, multiply the numerical parts:
0.005×0.003=0.000015
Then:
A=2×π×0.000015=0.00003π
Using π≈3.1416,
A≈0.00003×3.1416=0.000094248 m2
In scientific notation, A≈9.4248×10−5 m2.
The shear stress τ is related to the force F and area A by:
τ=AF
At rupture, τ=3.5×108 N m−2. Solving for F:
F=τ×A
Substituting the values:
F=(3.5×108)×(9.4248×10−5)
First, multiply the coefficients:
3.5×9.4248=32.9868
Then multiply the powers of 10:
108×10−5=103
So:
F≈32.9868×103=32986.8 N
Which is 3.29868×104 N. Rounding to two significant figures, as in the options, gives approximately 3.3×104 N.
Alternatively, using exact values:
A=2πrt=2×π×0.005×0.003=2×π×1.5×10−5=3π×10−5 m2
Then:
F=(3.5×108)×(3π×10−5)=3.5×3×π×108−5=10.5π×103=10500π N
With π≈3.1416,
F≈10500×3.1416=32986.8 N≈3.3×104 N
Comparing with the options, 3.3×104 N corresponds to option C.
Hence, the correct answer is Option C.