RankRizz
JEE MAIN 2019 · 10 APR S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2019 Physics question — Stress, strain, Hooke's law and Young's modulus

In an experiment, brass and steel wires of length 1 m each with areas of cross section 1 mm2^2 are used. The wires are connected in series and one end of the combined wire is connected to a rigid support and other end is subjected to elongation. The stress required to produce a net elongation of 0.2 mm is,
[Given, the Young's Modulus for steel and brass are, respectively, 120×109120 \times 10^9 N/m2^2 and 60×10960 \times 10^9 N/m2^2]

SOLUTION

We have two wires, one of brass and one of steel, each of length L=1 mL = 1 \text{ m} and cross-sectional area A=1 mm2=1×10−6 m2A = 1 \text{ mm}^2 = 1 \times 10^{-6}\,\text{m}^2. The wires are joined in series, so when a tensile force is applied the same force FF acts on both wires. Because the area is the same for both, the stress σ\sigma in each wire is also the same, where

σ=FA.\sigma = \dfrac{F}{A}.

The elongation of a wire obeys Hooke’s law for small strains:

ΔL=σLY,\Delta L = \dfrac{\sigma L}{Y},

where YY is Young’s modulus. First we write down the given values:

Ysteel=120×109 N m−2,Ybrass=60×109 N m−2.Y_{\text{steel}} = 120 \times 10^{9}\,\text{N m}^{-2},\qquad Y_{\text{brass}} = 60 \times 10^{9}\,\text{N m}^{-2}.

For the brass wire the extension is

ΔLbrass=σLYbrass,\Delta L_{\text{brass}} = \dfrac{\sigma L}{Y_{\text{brass}}},

and for the steel wire

ΔLsteel=σLYsteel.\Delta L_{\text{steel}} = \dfrac{\sigma L}{Y_{\text{steel}}}.

The two wires are in series, so the total elongation is the sum of the individual elongations:

ΔLtotal=ΔLbrass+ΔLsteel=σLYbrass+σLYsteel=σL(1Ybrass+1Ysteel).\Delta L_{\text{total}} = \Delta L_{\text{brass}} + \Delta L_{\text{steel}} = \dfrac{\sigma L}{Y_{\text{brass}}} + \dfrac{\sigma L}{Y_{\text{steel}}} = \sigma L\left(\dfrac{1}{Y_{\text{brass}}} + \dfrac{1}{Y_{\text{steel}}}\right).

The experiment specifies a required total elongation of

ΔLtotal=0.2 mm=0.2×10−3 m.\Delta L_{\text{total}} = 0.2 \text{ mm} = 0.2 \times 10^{-3}\,\text{m}.

Substituting L=1 mL = 1 \text{ m} and solving for σ\sigma gives

σ=ΔLtotalL(1Ybrass+1Ysteel).\sigma = \dfrac{\Delta L_{\text{total}}} {L\left(\dfrac{1}{Y_{\text{brass}}} + \dfrac{1}{Y_{\text{steel}}}\right)}.

Now we evaluate the bracketed term:

1Ybrass+1Ysteel=160×109+1120×109=2120×109+1120×109=3120×109=140×109=2.5×10−11 m2N−1.\dfrac{1}{Y_{\text{brass}}} + \dfrac{1}{Y_{\text{steel}}} = \dfrac{1}{60 \times 10^{9}} + \dfrac{1}{120 \times 10^{9}} = \dfrac{2}{120 \times 10^{9}} + \dfrac{1}{120 \times 10^{9}} = \dfrac{3}{120 \times 10^{9}} = \dfrac{1}{40 \times 10^{9}} = 2.5 \times 10^{-11}\,\text{m}^2\text{N}^{-1}.

Putting everything together, we obtain

σ=0.2×10−31×2.5×10−11=0.22.5×108=0.08×108=8.0×106 N m−2.\sigma = \dfrac{0.2 \times 10^{-3}} {1 \times 2.5 \times 10^{-11}} = \dfrac{0.2}{2.5} \times 10^{8} = 0.08 \times 10^{8} = 8.0 \times 10^{6}\,\text{N m}^{-2}.

Hence, the correct answer is Option A.

Tagged Stress, strain, Hooke's law and Young's modulus. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicStress, strain, Hooke's law and Young's modulus
TypeMultiple choice