RankRizz
JEE MAIN 2021 · 26 AUG S1+4 / −1MEDIUMTRANSCRIBED

JEE Main 2021 Physics question — Angle of contact and capillary rise

Two narrow bores of diameter 5.0 mm and 8.0 mm are joined together to form a U-shaped tube open at both ends. If this U-tube contains water, what is the difference in the level of two limbs of the tube.
[Take surface tension of water T=7.3×10−2T = 7.3 \times 10^{-2} N m−1^{-1}, angle of contact = 0, g=10g = 10 m s−2^{-2} and density of water = 1.0×1031.0 \times 10^3 kg m−3^{-3}]

SOLUTION

We have a U-shaped tube whose two limbs are capillaries of different radii, both in contact with water. Because water wets glass (angle of contact θ=0∘⇒cos⁡θ=1\theta = 0^{\circ} \Rightarrow \cos\theta = 1), it rises inside each limb due to surface tension. At any horizontal level inside the continuous water column, the pressures in the two limbs must be the same. That requirement allows us to relate the capillary rises in the two limbs.

First, recall the standard capillary rise formula for a single capillary tube:

h=2Tcos⁡θρgrh = \frac{2T\cos\theta}{\rho g r}

where

T=surface tension,θ=angle of contact,ρ=density of the liquid,g=acceleration due to gravity,r=radius of the tube.T = \text{surface tension}, \quad \theta = \text{angle of contact}, \quad \rho = \text{density of the liquid}, \quad g = \text{acceleration due to gravity}, \quad r = \text{radius of the tube}.

Because both limbs are filled with the same water, we apply this formula separately to each limb, obtaining

h1=2Tρgr1,h2=2Tρgr2h_1 = \frac{2T}{\rho g r_1}, \qquad h_2 = \frac{2T}{\rho g r_2}

with r1r_1 and r2r_2 being the radii of the narrower and the wider limbs, respectively.

Inside the continuous water column, the hydrostatic pressures at the same horizontal level must balance. That means the column of water in the narrower limb must rise higher than that in the wider limb by exactly the amount that equalises the pressures. Hence the difference in heights of the two free surfaces is simply

Δh=h1−h2=2Tρg(1r1−1r2).\Delta h = h_1 - h_2 = \frac{2T}{\rho g}\left(\frac{1}{r_1} - \frac{1}{r_2}\right).

Now we substitute the numerical data. The diameters are 5.0 mm and 8.0 mm, so the radii are

r1=5.0 mm2=2.5 mm=2.5×10−3 m,r_1 = \frac{5.0\ \text{mm}}{2} = 2.5\ \text{mm} = 2.5 \times 10^{-3}\ \text{m},

r2=8.0 mm2=4.0 mm=4.0×10−3 m.r_2 = \frac{8.0\ \text{mm}}{2} = 4.0\ \text{mm} = 4.0 \times 10^{-3}\ \text{m}.

Compute the reciprocal radii:

1r1=12.5×10−3=0.4×103 m−1=400 m−1,\frac{1}{r_1} = \frac{1}{2.5 \times 10^{-3}} = 0.4 \times 10^{3}\ \text{m}^{-1} = 400\ \text{m}^{-1},

1r2=14.0×10−3=0.25×103 m−1=250 m−1.\frac{1}{r_2} = \frac{1}{4.0 \times 10^{-3}} = 0.25 \times 10^{3}\ \text{m}^{-1} = 250\ \text{m}^{-1}.

Thus

1r1−1r2=400−250=150 m−1.\frac{1}{r_1} - \frac{1}{r_2} = 400 - 250 = 150\ \text{m}^{-1}.

Next, evaluate the coefficient 2Tρg\dfrac{2T}{\rho g}:

2T=2×7.3×10−2 N m−1=1.46×10−1 N m−1,2T = 2 \times 7.3 \times 10^{-2}\ \text{N\,m}^{-1} = 1.46 \times 10^{-1}\ \text{N\,m}^{-1},

ρg=1.0×103 kg m−3×10 m s−2=1.0×104 N m−3.\rho g = 1.0 \times 10^{3}\ \text{kg\,m}^{-3} \times 10\ \text{m\,s}^{-2} = 1.0 \times 10^{4}\ \text{N\,m}^{-3}.

Therefore

2Tρg=1.46×10−11.0×104=1.46×10−5 m.\frac{2T}{\rho g} = \frac{1.46 \times 10^{-1}}{1.0 \times 10^{4}} = 1.46 \times 10^{-5}\ \text{m}.

Finally, multiply to find the height difference:

Δh=1.46×10−5 m×150=2.19×10−3 m.\Delta h = 1.46 \times 10^{-5}\ \text{m} \times 150 = 2.19 \times 10^{-3}\ \text{m}.

Convert metres to millimetres:

2.19×10−3 m=2.19 mm.2.19 \times 10^{-3}\ \text{m} = 2.19\ \text{mm}.

Hence, the correct answer is Option C.

Tagged Angle of contact and capillary rise. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicAngle of contact and capillary rise
TypeMultiple choice