RankRizz
JEE MAIN 2019 · 12 JAN S2+4 / −1EASYTRANSCRIBED

JEE Main 2019 Physics question — Fluid pressure, Pascal's law and accelerated/rotating liquids

A long cylindrical vessel is half filled with a liquid. When the vessel is rotated about its own vertical axis, the liquid rises up near the wall. If the radius of vessel is 5 cm and its rotational speed is 2 rotations per second, then the difference in the heights between the center and the sides, in cm, will be:

SOLUTION

We begin by recalling what happens to the free surface of a liquid when its container spins steadily about a vertical axis. The surface becomes a paraboloid whose height, measured upward from the lowest point, is given by the equation

z  =  ω2r22g+C,z \;=\; \frac{\omega^{2} r^{2}}{2g} + C,

where ω\omega is the angular speed of the vessel, rr is the radial distance from the axis, gg is the acceleration due to gravity and CC is a constant representing the level at the centre. Hence, the rise of the liquid at any radius is

z(r)−z(0)  =  ω2r22g.z(r) - z(0) \;=\; \frac{\omega^{2} r^{2}}{2g}.

We are interested in the maximum rise, i.e. the difference in height between the wall (radius R=5 cmR = 5 \text{ cm}) and the centre (r=0r = 0). Putting r=Rr = R gives

Δh  =  ω2R22g.\Delta h \;=\; \frac{\omega^{2} R^{2}}{2g}.

Now we calculate each quantity one by one.

The vessel completes n=2n = 2 full rotations every second, so the angular speed is

ω  =  2πn  =  2π×2  =  4π  rad s−1.\omega \;=\; 2\pi n \;=\; 2\pi \times 2 \;=\; 4\pi \; \text{rad s}^{-1}.

Next, convert the radius to metres so that all SI units are consistent:

R=5 cm=0.05 m.R = 5 \text{ cm} = 0.05 \text{ m}.

Square both ω\omega and RR so we can place them into the formula:

ω2=(4π)2=16π2,\omega^{2} = (4\pi)^{2} = 16\pi^{2},

R2=(0.05)2=0.0025.R^{2} = (0.05)^{2} = 0.0025.

Multiply these two squared quantities:

ω2R2=16π2×0.0025.\omega^{2} R^{2} = 16\pi^{2} \times 0.0025.

Using π2≈9.8696\pi^{2} \approx 9.8696 we have

16π2=16×9.8696≈157.9136,16\pi^{2} = 16 \times 9.8696 \approx 157.9136,

so

ω2R2≈157.9136×0.0025≈0.3948.\omega^{2} R^{2} \approx 157.9136 \times 0.0025 \approx 0.3948.

We take g=9.8 m s−2g = 9.8 \text{ m s}^{-2}. Substituting everything into the formula for Δh\Delta h we obtain

Δh  =  0.39482×9.8.\Delta h \;=\; \frac{0.3948}{2 \times 9.8}.

The denominator is 2g=2×9.8=19.62g = 2 \times 9.8 = 19.6, so

Δh=0.394819.6≈0.02016 m.\Delta h = \frac{0.3948}{19.6} \approx 0.02016 \text{ m}.

Convert this height back into centimetres:

0.02016 m=0.02016×100 cm=2.016 cm.0.02016 \text{ m} = 0.02016 \times 100 \text{ cm} = 2.016 \text{ cm}.

Thus the difference in height between the liquid level at the wall and at the centre is essentially 2.0 cm2.0 \text{ cm} (to the precision of the given data).

Hence, the correct answer is Option B.

Tagged Fluid pressure, Pascal's law and accelerated/rotating liquids. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicFluid pressure, Pascal's law and accelerated/rotating liquids
TypeMultiple choice