RankRizz
JEE MAIN 2019 · 10 APR S1+4 / −1MEDIUMTRANSCRIBED

JEE Main 2019 Physics question — Angle of contact and capillary rise

The ratio of surface tensions of mercury and water is given to be 7.5, while the ratio of their densities is 13.6. Their contact angles, with glass, are close to 135° and 0°, respectively. If it is observed that mercury gets depressed by an amount hh in a capillary tube of radius r1r_1, while water rises by the same amount hh in a capillary tube of radius r2r_2, then the ratio r1r2\frac{r_1}{r_2} is close to

SOLUTION

For a liquid contained in a narrow capillary tube, the height of rise or depression is governed by the capillary formula

h  =  2Tcos⁡θρg r  ,h \;=\; \frac{2T\cos\theta}{\rho g\,r}\;,

where TT is the surface tension of the liquid, θ\theta is the contact angle with the tube material, ρ\rho is the density of the liquid, gg is the acceleration due to gravity, and rr is the inner radius of the capillary tube. This expression gives a positive height for rise (when cos⁡θ>0\cos\theta>0) and a negative height for depression (when cos⁡θ<0\cos\theta<0). However, the magnitude of the height is always

∣h∣  =  2T ∣cos⁡θ∣ρg r.|h| \;=\; \frac{2T\,|\cos\theta|}{\rho g\,r}.

According to the statement of the problem, the magnitude of the depression of mercury equals the magnitude of the rise of water and is denoted by the same symbol hh. Hence we write, for mercury (subscript mm) and water (subscript ww)

h  =  2Tm ∣cos⁡θm∣ρmg r1andh  =  2Tw ∣cos⁡θw∣ρwg r2.h \;=\; \frac{2T_m\,|\cos\theta_m|}{\rho_m g\,r_1} \quad\text{and}\quad h \;=\; \frac{2T_w\,|\cos\theta_w|}{\rho_w g\,r_2}.

Since both right-hand sides are equal to the same hh, we equate them directly:

2Tm ∣cos⁡θm∣ρmg r1  =  2Tw ∣cos⁡θw∣ρwg r2.\frac{2T_m\,|\cos\theta_m|}{\rho_m g\,r_1} \;=\; \frac{2T_w\,|\cos\theta_w|}{\rho_w g\,r_2}.

The common factors 22 and gg cancel from both numerators and denominators, leaving

Tm ∣cos⁡θm∣ρm r1  =  Tw ∣cos⁡θw∣ρw r2.\frac{T_m\,|\cos\theta_m|}{\rho_m\,r_1} \;=\; \frac{T_w\,|\cos\theta_w|}{\rho_w\,r_2}.

Rearranging to isolate the ratio of the radii, we obtain

r1r2  =  TmTw  ρwρm  ∣cos⁡θm∣∣cos⁡θw∣.\frac{r_1}{r_2} \;=\;\frac{T_m}{T_w}\; \frac{\rho_w}{\rho_m}\; \frac{|\cos\theta_m|}{|\cos\theta_w|}.

Now we substitute the numerical data supplied in the question:

Surface-tension ratio: TmTw=7.5.\dfrac{T_m}{T_w}=7.5.

Density ratio: ρmρw=13.6  ⟹  ρwρm=113.6.\dfrac{\rho_m}{\rho_w}=13.6 \;\Longrightarrow\; \dfrac{\rho_w}{\rho_m}=\dfrac{1}{13.6}.

Contact angles:
For mercury θm=135∘ ,∣cos⁡θm∣=∣cos⁡135∘∣=22≈0.707,\theta_m=135^\circ\,,\quad |\cos\theta_m|=|\cos135^\circ|=\dfrac{\sqrt2}{2}\approx0.707,
For water θw=0∘ ,∣cos⁡θw∣=∣cos⁡0∘∣=1.\theta_w=0^\circ\,,\quad |\cos\theta_w|=|\cos0^\circ|=1.

Substituting these three pieces of information into the radius ratio gives

r1r2  =  7.5  (113.6)  (0.7071)  =  7.5×0.70713.6.\frac{r_1}{r_2} \;=\; 7.5\; \left(\frac1{13.6}\right)\; \left(\frac{0.707}{1}\right) \;=\; \frac{7.5\times0.707}{13.6}.

First, multiplying 7.5×0.7077.5\times0.707 yields

7.5×0.707  ≈  5.30.7.5\times0.707\;\approx\;5.30.

Next, dividing by 13.613.6 produces

5.3013.6  ≈  0.39.\frac{5.30}{13.6}\;\approx\;0.39.

Converting to an exact fraction close to this decimal, we note that

0.39  is almost equal to  25=0.40.0.39\;\text{is almost equal to}\;\frac{2}{5}=0.40.

Among the options offered, 25\dfrac25 is clearly the closest value.

Hence, the correct answer is Option D.

Tagged Angle of contact and capillary rise. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicAngle of contact and capillary rise
TypeMultiple choice