RankRizz
JEE MAIN 2016 · 03 APR OFFLINE+4 / −1EASYTRANSCRIBED

JEE Main 2016 Physics question — Galvanometer conversion to ammeter and voltmeter

A galvanometer having a coil resistance of 100 Ω\Omega gives a full scale deflection, when a current of 1 mA is passed through it. The value of the resistance, which can convert this galvanometer into ammeter giving a full scale deflection for a current of 10 A, is:

SOLUTION

We are given a moving-coil galvanometer with an internal resistance Rg=100  ΩR_g = 100\;\Omega. It shows full-scale deflection when the current through it is Ig=1 mA=0.001 AI_g = 1\ \text{mA} = 0.001\ \text{A}.

We wish to use this galvanometer as an ammeter that can measure a much larger full-scale current I=10 AI = 10\ \text{A}. To achieve this, a very small resistance, called a shunt resistance, is connected in parallel with the galvanometer. The shunt diverts most of the current so that only the safe current IgI_g flows through the delicate galvanometer coil.

First, we recall (and state) the standard relation for a shunt resistance SS connected in parallel with a galvanometer:

S  =  Ig RgI−Ig.S \;=\; \dfrac{I_g\,R_g}{I - I_g}.

This formula arises from the condition that the potential difference across the galvanometer and the shunt must be equal, because they are in parallel. The derivation is:

The current through the shunt is the remainder I−IgI - I_g. The potential drop across the galvanometer is

Vg  =  Ig Rg.V_g \;=\; I_g\,R_g.

Since the same potential drop appears across the shunt, Ohm’s law for the shunt gives

Vg  =  (I−Ig) S.V_g \;=\; (I - I_g)\,S.

Equating the two expressions for the same voltage, we have

Ig Rg  =  (I−Ig) S.I_g\,R_g \;=\; (I - I_g)\,S.

Now we solve for SS by dividing both sides by (I−Ig):(I - I_g):

S  =  Ig RgI−Ig.S \;=\; \dfrac{I_g\,R_g}{I - I_g}.

With the formula stated and derived, we now substitute the numerical values.

First, calculate the numerator Ig RgI_g\,R_g:

Ig Rg  =  (0.001 A) (100 Ω)  =  0.1 V.I_g\,R_g \;=\; (0.001\ \text{A})\,(100\ \Omega) \;=\; 0.1\ \text{V}.

Next, compute the denominator I−IgI - I_g:

I−Ig  =  10 A−0.001 A  =  9.999 A.I - I_g \;=\; 10\ \text{A} - 0.001\ \text{A} \;=\; 9.999\ \text{A}.

Now form the fraction:

S  =  0.1 V9.999 A.S \;=\; \dfrac{0.1\ \text{V}}{9.999\ \text{A}}.

Divide the numbers:

S  =  0.010001 Ω.S \;=\; 0.010001\ \Omega.

The result rounds off neatly to

S  ≈  0.01 Ω.S \;\approx\; 0.01\ \Omega.

This is exactly the value of resistance that must be connected in parallel with the galvanometer to convert it into an ammeter capable of reading up to 10 A10\ \text{A} at full scale.

Hence, the correct answer is Option C.

Tagged Galvanometer conversion to ammeter and voltmeter. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicGalvanometer conversion to ammeter and voltmeter
TypeMultiple choice