RankRizz
JEE MAIN 2016 · 03 APR OFFLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2016 Physics question — Series LCR circuits: impedance and phase

An arc lamp requires a direct current of 10 A at 80 V to function. If it is connected to a 220 V (rms), 50 Hz AC supply, the series inductor needed for it to work is close to:

SOLUTION

First note what the arc-lamp itself needs. On direct current it draws I=10 AI = 10 \text{ A} when the potential difference across it is V=80 VV = 80 \text{ V}. For a purely resistive device the resistance is defined by Ohm’s law

R=VI.R = \dfrac{V}{I}.

Substituting the given values, we have

R=8010=8  Ω.R = \dfrac{80}{10} = 8 \;\Omega.

Now the lamp must be operated from a sinusoidal mains supply of 220 V(rms),  50 Hz220 \text{ V(rms)},\; 50 \text{ Hz}, yet we still want the current through the lamp to be only 10 A(rms)10 \text{ A(rms)}. Because the mains voltage is higher than 80 V, an additional impedance must be placed in series to limit the current. The problem asks for an inductor, so that extra impedance will be the inductive reactance XLX_L of the coil.

For a series circuit containing a resistance RR and an inductive reactance XLX_L, the magnitude of the total impedance ZZ is given by

Z=R2+XL2.Z = \sqrt{R^{2} + X_L^{2}}.

But on alternating current we also have, from Ohm’s law extended to impedances,

Z=VrmsIrms.Z = \dfrac{V_{\text{rms}}}{I_{\text{rms}}}.

Substituting the required rms values,

Z=22010=22  Ω.Z = \dfrac{220}{10} = 22 \;\Omega.

Equating the two expressions for ZZ gives

R2+XL2=22.\sqrt{R^{2} + X_L^{2}} = 22.

We already found R=8  ΩR = 8 \;\Omega, so

82+XL2=22,\sqrt{8^{2} + X_L^{2}} = 22,

64+XL2=22.\sqrt{64 + X_L^{2}} = 22.

Now square both sides to remove the square root:

64+XL2=222=484.64 + X_L^{2} = 22^{2} = 484.

Solving for XL2X_L^{2}, we obtain

XL2=484−64=420,X_L^{2} = 484 - 64 = 420,

so

XL=420≈20.49  Ω.X_L = \sqrt{420} \approx 20.49 \;\Omega.

The inductive reactance is related to the inductance LL by the formula

XL=ωL,X_L = \omega L,

where ω\omega is the angular frequency ω=2πf\omega = 2\pi f. For a supply frequency of f=50 Hzf = 50 \text{ Hz}, we have

ω=2π×50=100π  rad s−1≈314.16  rad s−1.\omega = 2\pi \times 50 = 100\pi \;\text{rad s}^{-1} \approx 314.16 \;\text{rad s}^{-1}.

Substituting into the reactance formula gives

L=XLω=20.49314.16  H.L = \dfrac{X_L}{\omega} = \dfrac{20.49}{314.16} \;\text{H}.

Carrying out the division,

L≈0.0652  H.L \approx 0.0652 \;\text{H}.

This value rounds to 0.065 H0.065 \text{ H}, matching option B.

Hence, the correct answer is Option B.

Tagged Series LCR circuits: impedance and phase. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicSeries LCR circuits: impedance and phase
TypeMultiple choice