RankRizz
JEE MAIN 2019 · 12 JAN S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2019 Physics question — Superposition, interference and beats

A resonance tube is old and has a jagged end. It is still used in the laboratory to determine the velocity of sound in air. A tuning fork of frequency 512 Hz produces first resonance when the tube is filled with water to a mark 11 cm below a reference mark, near the open end of the tube. The experiment is repeated with another fork of frequency 256 Hz which produces first resonance when water reaches a mark 27 cm below the reference mark. The velocity of sound in air, obtained in the experiment, is close to

SOLUTION

For a resonance tube closed at the water surface and open at the top, the first (fundamental) resonance condition is stated by the formula

L  =  λ4,L \;=\;\frac{\lambda}{4},

where LL is the effective length of the vibrating air column and λ\lambda is the wavelength of the sound in air. The effective length is always a little greater than the measured air-column length because of the end correction at the open end.

Let us denote by ee the end correction produced by the open end and by dd the unknown extra length between the jagged tip of the tube and the clearly visible reference mark. Both ee and dd are constant for every observation on this particular tube.

When the 512 Hz fork is used, the water is 11 cm below the reference mark. The measured length of the air column is therefore 11 cm, so the effective length becomes

L1  =  11  cm+d+e.L_1 \;=\;11\;\text{cm}+d+e.

When the 256 Hz fork is used, the water is 27 cm below the reference mark, giving

L2  =  27  cm+d+e.L_2 \;=\;27\;\text{cm}+d+e.

For each fork the fundamental condition L=λ/4L=\lambda/4 must be satisfied. We use the relation λ=v/f,\lambda=v/f, where vv is the velocity of sound and ff is the frequency. Substituting for each fork we have

11+d+e  =  v4 f1,f1=512  Hz,11+d+e \;=\;\frac{v}{4\,f_1},\qquad f_1=512\;\text{Hz},

27+d+e  =  v4 f2,f2=256  Hz.27+d+e \;=\;\frac{v}{4\,f_2},\qquad f_2=256\;\text{Hz}.

It is convenient to combine the two unknown constants dd and ee into a single constant

a  =  d+e.a \;=\;d+e.

Writing the two equations with this shorthand gives

11+a  =  v4×512,11+a \;=\;\frac{v}{4\times512},

27+a  =  v4×256.27+a \;=\;\frac{v}{4\times256}.

From the first equation we have

v  =  4×512 (11+a)  =  2048 (11+a).v \;=\;4\times512\,(11+a)\;=\;2048\,(11+a).

From the second equation we have

v  =  4×256 (27+a)  =  1024 (27+a).v \;=\;4\times256\,(27+a)\;=\;1024\,(27+a).

Because both right-hand sides equal the same velocity vv, we equate them:

2048 (11+a)  =  1024 (27+a).2048\,(11+a) \;=\;1024\,(27+a).

Dividing every term by 1024 simplifies the equation to

2 (11+a)  =  27+a.2\,(11+a) \;=\;27+a.

Now expanding and gathering like terms,

22+2a  =  27+a,22+2a \;=\;27+a,

2a−a  =  27−22,2a-a \;=\;27-22,

a  =  5  cm.a \;=\;5\;\text{cm}.

Substituting a=5  cma=5\;\text{cm} into the first velocity expression gives

v  =  2048 (11+5)  =  2048×16  cm s−1.v \;=\;2048\,(11+5)\;=\;2048\times16\;\text{cm s}^{-1}.

Calculating the product,

2048×16=32768  cm s−1.2048\times16=32768\;\text{cm s}^{-1}.

Converting centimetres per second to metres per second (1 m = 100 cm),

v  =  32768100  m s−1  =  327.68  m s−1.v \;=\;\frac{32768}{100}\;\text{m s}^{-1}\;=\;327.68\;\text{m s}^{-1}.

Among the given options, 328 m s−1 is the closest to this calculated value.

Hence, the correct answer is Option D.

Tagged Superposition, interference and beats. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
ChapterWaves
TopicSuperposition, interference and beats
TypeMultiple choice