A cylinder is rolling down on an inclined plane of inclination . Its acceleration during rolling down will be m s, where _______ (use m s).
Every JEE Main question on Rolling without slipping: kinematics and energy, one of the ideas inside Rotational Motion: 8 questions from 2005–2024, 1 of them in the last five years. Newest first, answer key on every one. Free to read.
Questions
8
Years asked
6
Since
2005
Of the chapter
3%
Questions on Rolling without slipping: kinematics and energy in each year it was asked.
1–8 OF 8 · NEWEST FIRST
A cylinder is rolling down on an inclined plane of inclination . Its acceleration during rolling down will be m s, where _______ (use m s).
Two particles A, B are moving on two concentric circles of radii and with equal angular speed . At , their positions and direction of motion are shown in the figure. The relative velocity at is given by:

The machine as shown has 2 rods of length 1 m connected by a pivot at the top. The end of one rod is connected to the floor by a stationary pivot and the end of the other rod has a roller that rolls along the floor in a slot. As the roller goes back and forth, a 2 kg weight moves up and down. If the roller is moving towards right at a constant speed, the weight moves up with a:

Speed which is th of that of the roller when the weight is 0.4 m above the ground
Constant speed
Decreasing speed
Increasing speed
A solid sphere having mass and radius rolls down an inclined plane. Then its kinetic energy is
rotational and translational
rotational and translational
rotational and translational
rotational and translational
A thick-walled hollow sphere has outside radius . It rolls down an incline without slipping and its speed at the bottom is . Now the incline is waxed, so that it is practically frictionless and the sphere is observed to slide down (without any rolling). Its speed at the bottom is observed to be . The radius of gyration of the hollow sphere about an axis through its centre is
A solid sphere is rolling on a surface as shown in figure, with a translational velocity ms. If it is to climb the inclined surface continuing to roll without slipping, then minimum velocity for this to happen is

A round uniform body of radius , mass and moment of inertia , rolls down (without slipping) an inclined plane making an angle with the horizontal. Then its acceleration is
An annular ring with inner and outer radii and is rolling without slipping with a uniform angular speed. The ratio of the forces experienced by the two particles situated on the inner and outer parts of the ring, is
RELATED ROTATIONAL MOTION TOPICS