RankRizz
JEE MAIN 2019 · 09 JAN S1+4 / −1HARDTRANSCRIBED

JEE Main 2019 Physics question — Fixed-axis rotation: kinematics, rotational energy and pulleys

Two masses mm and m2\frac{m}{2} are connected at the two ends of a massless rigid rod of length ll. The rod is suspended by a thin wire of torsional constant kk at the centre of mass of the rod-mass system (see figure). Because of torsional constant kk, the restoring torque is τ=kθ\tau = k\theta for angular displacement θ\theta. If the rod is rotated by θ0\theta_0 and released, the tension in it when it passes through its mean position will be:

Figure for JEE Main 2019 Physics question on Fixed-axis rotation: kinematics, rotational energy and pulleys
SOLUTION

Let the heavier mass mm be placed at the left end of the light, rigid rod and the lighter mass m2\dfrac{m}{2} at the right end. The total length of the rod is ll. The rod is suspended from its centre of mass by a thin torsion wire whose torsional constant is kk, so the restoring torque supplied by the wire is τ=kθ\tau = k\theta whenever the system is given a small angular displacement θ\theta about the vertical.

First we determine the position of the centre of mass along the rod. Measuring the distance xx from the heavier mass, we have

x  =  m (0)  +  m2 (l)m+m2  =  m2 l3m2  =  l3.x \;=\; \frac{m\,(0) \;+\; \dfrac{m}{2}\,(l)}{m + \dfrac{m}{2}} \;=\; \frac{\dfrac{m}{2}\,l}{\dfrac{3m}{2}} \;=\; \frac{l}{3}.

Hence the centre of mass lies at a distance l3\dfrac{l}{3} from the mass mm and therefore at a distance 2l3\dfrac{2l}{3} from the mass m2\dfrac{m}{2}.

Writing these two distances explicitly,

r1=l3,r2=2l3,r_1 = \frac{l}{3}, \qquad r_2 = \frac{2l}{3},

where r1r_1 and r2r_2 are the radii of circular motion of the two masses about the suspension (centre of mass) when the system oscillates.

Next we need the moment of inertia of the system about this suspension point. Because the rod itself is massless,

I=m r12+m2 r22=m ⁣(l3)2+m2 ⁣(2l3)2.I = m\,r_1^{2} + \frac{m}{2}\,r_2^{2} = m\!\left(\frac{l}{3}\right)^{2} + \frac{m}{2}\!\left(\frac{2l}{3}\right)^{2}.

Expanding the squares,

I=m l29+m2 4l29=ml29  (1+2)=ml23.I = m\,\frac{l^{2}}{9} + \frac{m}{2}\,\frac{4l^{2}}{9} = \frac{m l^{2}}{9} \;\Bigl(1 + 2\Bigr) = \frac{m l^{2}}{3}.

For a torsional oscillator the angular frequency is given by the standard formula

ω=kI.\omega = \sqrt{\frac{k}{I}}.

The rod is rotated through an initial angle θ0\theta_0 and released from rest. The elastic potential energy stored in the wire at that extreme position is

U=12 k θ02.U = \frac{1}{2}\,k\,\theta_0^{2}.

When the system swings back and passes through its mean position θ=0\theta = 0, this potential energy is completely converted into rotational kinetic energy. Thus, by conservation of mechanical energy,

12 I ω ⁣m2=12 k θ02,\frac{1}{2}\,I\,\omega_{\!m}^{2} = \frac{1}{2}\,k\,\theta_0^{2},

where ω ⁣m\omega_{\!m} is the angular speed at the mean position. Cancelling the common factor 12\frac{1}{2}, we obtain

ω ⁣m2=kI θ02.\omega_{\!m}^{2} = \frac{k}{I}\,\theta_0^{2}.

Substituting the value of II found earlier,

ω ⁣m2=kml23  θ02=3kml2 θ02.\omega_{\!m}^{2} = \frac{k}{\dfrac{m l^{2}}{3}}\;\theta_0^{2} = \frac{3k}{m l^{2}}\,\theta_0^{2}.

We now turn to the tension in the rod when it passes through the mean position. At that instant both masses move in horizontal circles with the angular speed ω ⁣m\omega_{\!m}. The rod must supply the necessary centripetal force to each mass, and because the rod is light, the internal tensile force (tension) will be the same throughout its length provided the net axial force on the rod is zero.

The centripetal force required for the heavier mass mm is

T1=m r1 ω ⁣m2=m(l3)ω ⁣m2.T_1 = m\,r_1\,\omega_{\!m}^{2} = m\left(\frac{l}{3}\right)\omega_{\!m}^{2}.

For the lighter mass m2\dfrac{m}{2} the required centripetal force is

T2=m2 r2 ω ⁣m2=m2(2l3)ω ⁣m2=m(l3)ω ⁣m2.T_2 = \frac{m}{2}\,r_2\,\omega_{\!m}^{2} = \frac{m}{2}\left(\frac{2l}{3}\right)\omega_{\!m}^{2} = m\left(\frac{l}{3}\right)\omega_{\!m}^{2}.

Notice that T1=T2T_1 = T_2, so the same magnitude of tension acts at both ends of the rod. Calling this common value simply TT we have

T=m(l3)ω ⁣m2.T = m\left(\frac{l}{3}\right)\omega_{\!m}^{2}.

Finally substitute the expression for ω ⁣m2\omega_{\!m}^{2} obtained earlier:

T=m(l3)(3kml2 θ02)=m l3 3km l2 θ02=kl θ02.T = m\left(\frac{l}{3}\right)\left(\frac{3k}{m l^{2}}\,\theta_0^{2}\right) = \cancel{m}\,\frac{l}{3}\,\frac{3k}{\cancel{m}\,l^{2}}\,\theta_0^{2} = \frac{k}{l}\,\theta_0^{2}.

Thus the magnitude of the tension in the rod when it sweeps through its mean position is

T=kθ02l.T = \frac{k\theta_0^{2}}{l}.

Hence, the correct answer is Option D.

Tagged Fixed-axis rotation: kinematics, rotational energy and pulleys. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicFixed-axis rotation: kinematics, rotational energy and pulleys
TypeMultiple choice