RankRizz
JEE MAIN 2019 · 10 APR S1+4 / −1MEDIUMTRANSCRIBED

JEE Main 2019 Physics question — Thin lenses: lens formula, lens maker's formula and power

One plano-convex and one plano-concave lens of the same radius of curvature R but of different materials are joined side by side as shown in the figure. If the refractive index of the material of 1 is μ1\mu_1 and that of 2 is μ2\mu_2, then the focal length of the combination is:

Figure for JEE Main 2019 Physics question on Thin lenses: lens formula, lens maker's formula and power
SOLUTION

The two lenses are thin and are cemented together by their plane faces. Because the plane faces are in perfect contact, the separation between the lenses is practically zero, so their combination can be treated as a single thin system. For two thin lenses in contact we always use the formula

1F  =  1f1  +  1f2,\frac{1}{F} \;=\; \frac{1}{f_1}\;+\;\frac{1}{f_2},

where FF is the focal length of the combination, f1f_1 is the focal length of the first lens and f2f_2 is the focal length of the second lens.

We now calculate f1f_1 and f2f_2 one by one with the Lens-maker’s formula. The Lens-maker’s formula for a thin lens surrounded by air (refractive index μ=1\mu=1) is first stated:

1f  =  (μ−1)(1R1−1R2).\frac{1}{f} \;=\;(\mu - 1)\left(\frac{1}{R_1}-\frac{1}{R_2}\right).

Here  μ\mu  is the refractive index of the lens material,  R1R_1  is the radius of curvature of the first surface met by the light and  R2R_2  is that of the second surface. According to the usual sign convention the radius is taken positive when the centre of curvature lies to the right of the surface (in the direction of incident light) and negative otherwise.

Plano-convex lens (material 1)
For the plano-convex lens the first surface is the curved convex surface of radius RR and the second surface is plane, so R2=∞R_2=\infty. Therefore

1f1=(μ1−1)(1R−1∞)=(μ1−1)(1R−0)=μ1−1R.\frac{1}{f_1}= (\mu_1-1)\left(\frac{1}{R}-\frac{1}{\infty}\right) = (\mu_1-1)\left(\frac{1}{R}-0\right) =\frac{\mu_1-1}{R}.

So the focal length of the plano-convex lens is

f1=Rμ1−1.f_1=\frac{R}{\mu_1-1}.

Plano-concave lens (material 2)
For the plano-concave lens the first surface is plane, so R1=∞R_1=\infty, and the second surface is concave with the same magnitude of radius RR. Because the surface is concave, its centre of curvature lies on the same side as the emergent light and hence (with our sign convention) R2=+RR_2=+R. Substituting into the Lens-maker’s formula:

1f2=(μ2−1)(1∞−1R)=(μ2−1)(0−1R)=− μ2−1R.\frac{1}{f_2}= (\mu_2-1)\left(\frac{1}{\infty}-\frac{1}{R}\right) = (\mu_2-1)\left(0-\frac{1}{R}\right) = -\,\frac{\mu_2-1}{R}.

Thus

f2=− Rμ2−1.f_2 = -\,\frac{R}{\mu_2-1}.

(The negative sign correctly shows that the plano-concave lens is diverging.)

Power of the combination
Using the additivity of powers, we substitute 1f1\frac{1}{f_1} and 1f2\frac{1}{f_2} into the contact-lens formula:

1F=1f1+1f2=μ1−1R  +  (−μ2−1R)=μ1−1−μ2+1R=μ1−μ2R.\frac{1}{F}= \frac{1}{f_1}+\frac{1}{f_2} =\frac{\mu_1-1}{R} \;+\;\Bigl(-\frac{\mu_2-1}{R}\Bigr) =\frac{\mu_1-1-\mu_2+1}{R} =\frac{\mu_1-\mu_2}{R}.

Finally, inverting this result gives the focal length of the cemented combination:

F=Rμ1−μ2.F=\frac{R}{\mu_1-\mu_2}.

Hence, the correct answer is Option 4.

Tagged Thin lenses: lens formula, lens maker's formula and power. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicThin lenses: lens formula, lens maker's formula and power
TypeMultiple choice