There are 100 divisions on the circular scale of a screw gauge of pitch 1 mm. With no measuring quantity in between the jaws, the zero of the circular scale lies 5 divisions below the reference line. The diameter of a wire is then measured using this screw gauge. It is found that 4 linear scale divisions are clearly visible while 60 divisions on circular scale coincide with the reference line. The diameter of the wire is :
We need to find the diameter of a wire measured using a screw gauge that has a positive zero error. Since the least count of a screw gauge is given by , we have determined the smallest measurable length increment.
The problem states that with no measuring quantity between the jaws, the zero of the circular scale lies 5 divisions below the reference line. From this we infer a positive zero error, which is calculated as . Since a positive zero error indicates that the instrument reads more than the actual value, we must subtract it from the measured reading.
Next, the observed reading consists of a main scale reading and a circular scale reading. For the main scale reading, 4 linear scale divisions are visible, and since the pitch is 1 mm, each linear division equals 1 mm. Hence . The circular scale reading corresponds to the 60th division coinciding with the reference line, giving . Altogether, the observed reading is .
Finally, applying the zero error correction yields . The correct answer is Option (3): 4.55 mm.
Tagged Screw gauge: pitch, least count and zero error. Machine-assigned, so read it as a strong shortlist rather than a verdict.