RankRizz
JEE MAIN 2026 · 23 JAN S1+4 / −1EASYTRANSCRIBED

JEE Main 2026 Physics question — Screw gauge: pitch, least count and zero error

In a screw gauge, the zero of the circular scale lies 3 divisions above the horizontal pitch line when their metallic studs are brought in contact. Using this instrument thickness of a sheet is measured. If pitch scale reading is 1 mm and the circular scale reading is 51 then the correct thickness of the sheet is_____ mm.
[Assume least count is 0.01 mm]

SOLUTION

We are given a screw gauge with a zero error where the zero of the circular scale lies 3 divisions above the horizontal pitch line when the studs are in contact. The least count (LC) is 0.010.01 mm.

When the zero of the circular scale lies 3 divisions above the reference line, the circular scale has not reached its zero mark. This means extra rotation is needed to bring it to zero, which represents a negative zero error:

Zero error=−3×LC=−3×0.01=−0.03 mm\text{Zero error} = -3 \times \text{LC} = -3 \times 0.01 = -0.03 \text{ mm}

The observed reading is given by:

Observed reading=PSR+(CSR×LC)=1+(51×0.01)=1.51 mm\text{Observed reading} = \text{PSR} + (\text{CSR} \times \text{LC}) = 1 + (51 \times 0.01) = 1.51 \text{ mm}

The zero correction is the negative of the zero error, so the corrected reading is:

Correct thickness=Observed reading−Zero error=1.51−(−0.03)=1.54 mm\text{Correct thickness} = \text{Observed reading} - \text{Zero error} = 1.51 - (-0.03) = 1.54 \text{ mm}

The correct answer is  1.54 mm.

Tagged Screw gauge: pitch, least count and zero error. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicScrew gauge: pitch, least count and zero error
TypeMultiple choice