RankRizz
JEE MAIN 2015 · 04 APR OFFLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2015 Physics question — Electric potential and potential energy

A uniformly charged solid sphere of radius R has potential V0V_0 (measured with respect to ∞\infty) on its surface. For this sphere the equipotential surfaces with potential 3V02\frac{3V_0}{2}, 5V04\frac{5V_0}{4}, 3V04\frac{3V_0}{4} and V04\frac{V_0}{4} have radius R1R_1, R2R_2, R3R_3 and R4R_4 respectively. Then
Note: This question had two options correct at the time of examination. Proper corrections are made in the question to avoid it.

SOLUTION

For a uniformly charged solid sphere whose total charge is QQ and radius is RR, the electro-static potential at any point is obtained from the well-known results of electrostatics. We first state these results.

• At an external point, that is for r≥Rr \ge R, the sphere behaves like a point charge at its centre, so

Vout(r)=14πε0Qr.V_{\text{out}}(r)=\dfrac{1}{4\pi\varepsilon_0}\dfrac{Q}{r}.

• At an internal point, that is for r≤Rr \le R, the potential is

Vin(r)=14πε0Q2R3(3R2−r2).V_{\text{in}}(r)=\dfrac{1}{4\pi\varepsilon_0}\dfrac{Q}{2R^3}\left(3R^2-r^2\right).

On the surface r=Rr = R these two expressions must give the same value, which is the given surface potential V0V_0. Putting r=Rr = R in either formula we get

V0=14πε0QR.V_0=\dfrac{1}{4\pi\varepsilon_0}\dfrac{Q}{R}.

For convenience we now write every subsequent potential in terms of V0V_0.

1. Potential inside the sphere

Substituting Q4πε0=V0R\dfrac{Q}{4\pi\varepsilon_0} = V_0R in the internal formula gives

Vin(r)=V0R2R3(3R2−r2)=V0[32−r22R2].V_{\text{in}}(r)=\dfrac{V_0R}{2R^3}\left(3R^2-r^2\right)=V_0\left[\dfrac{3}{2}-\dfrac{r^2}{2R^2}\right].

2. Potential outside the sphere

Similarly, substituting in the external formula yields

Vout(r)=V0Rr.V_{\text{out}}(r)=V_0\dfrac{R}{r}.

We now locate the radii of the four equipotential surfaces mentioned in the problem.

(a) Surface with potential 3V02\dfrac{3V_0}{2}

This value of potential exceeds V0V_0, so the point must lie inside the sphere. We therefore equate it to the internal potential:

V0[32−r22R2]=3V02.V_0\left[\dfrac{3}{2}-\dfrac{r^2}{2R^2}\right]=\dfrac{3V_0}{2}.

Cancelling V0V_0 from both sides,

32−r22R2=32    ⟹    −r22R2=0    ⟹    r2=0    ⟹    r=0.\dfrac{3}{2}-\dfrac{r^2}{2R^2}=\dfrac{3}{2}\;\;\Longrightarrow\;\;-\dfrac{r^2}{2R^2}=0 \;\;\Longrightarrow\;\;r^2=0\;\;\Longrightarrow\;\;r=0.

Hence R1=0.R_1 = 0. This is only a single point—the centre of the sphere.

(b) Surface with potential 5V04\dfrac{5V_0}{4}

Again this value is larger than V0V_0, so we use the internal expression:

V0[32−r22R2]=5V04.V_0\left[\dfrac{3}{2}-\dfrac{r^2}{2R^2}\right]=\dfrac{5V_0}{4}.

Dividing by V0V_0 and rewriting the left side with a common denominator 4,

64−r22R2=54.\dfrac{6}{4}-\dfrac{r^2}{2R^2}=\dfrac{5}{4}.

Taking the difference,

64−54=r22R2    ⟹    14=r22R2.\dfrac{6}{4}-\dfrac{5}{4}=\dfrac{r^2}{2R^2} \;\;\Longrightarrow\;\; \dfrac{1}{4}=\dfrac{r^2}{2R^2}.

Multiplying both sides by 2R22R^2,

r2=R22    ⟹    r=R2.r^2=\dfrac{R^2}{2}\;\;\Longrightarrow\;\;r=\dfrac{R}{\sqrt{2}}.

Thus R2=R2  (≈0.707 R).R_2=\dfrac{R}{\sqrt{2}}\;(\approx0.707\,R).

(c) Surface with potential 3V04\dfrac{3V_0}{4}

Now the potential is below V0V_0, so we are outside the sphere. Using the external formula,

V0Rr=3V04.V_0\dfrac{R}{r}=\dfrac{3V_0}{4}.

Eliminating V0V_0 gives

Rr=34    ⟹    r=4R3.\dfrac{R}{r}=\dfrac{3}{4}\;\;\Longrightarrow\;\;r=\dfrac{4R}{3}.

Hence R3=4R3  (≈1.333 R).R_3=\dfrac{4R}{3}\;(\approx1.333\,R).

(d) Surface with potential V04\dfrac{V_0}{4}

Again we are outside, so

V0Rr=V04    ⟹    Rr=14    ⟹    r=4R.V_0\dfrac{R}{r}=\dfrac{V_0}{4}\;\;\Longrightarrow\;\;\dfrac{R}{r}=\dfrac{1}{4}\;\;\Longrightarrow\;\;r=4R.

Thus R4=4R.R_4=4R.

We have obtained

R1=0,R2=R2,R3=4R3,R4=4R.R_1=0,\qquad R_2=\dfrac{R}{\sqrt{2}},\qquad R_3=\dfrac{4R}{3},\qquad R_4=4R.

Let us now examine each option.

Option A states 2R>R4.2R > R_4. Substituting R4=4RR_4=4R gives 2R>4R,2R > 4R, which is clearly false.

Option B asserts two points: R1=0R_1 = 0 (true) and R2>(R4−R3).R_2 > (R_4 - R_3). Compute R4−R3=4R−4R3=12R−4R3=8R3  (≈2.667 R).R_4-R_3=4R-\dfrac{4R}{3}=\dfrac{12R-4R}{3}=\dfrac{8R}{3}\;( \approx 2.667\,R). But R2=R2  (≈0.707 R).R_2=\dfrac{R}{\sqrt{2}}\;( \approx 0.707\,R). Since 0.707 R>2.667 R0.707\,R > 2.667\,R is false, the whole option is false.

Option C says R1≠0R_1 \neq 0 (false, we have R1=0R_1=0), so the option is already ruled out.

Option D combines R1=0R_1 = 0 (true) with R2<(R4−R3).R_2 < (R_4 - R_3). We have R2≈0.707 RR_2 \approx 0.707\,R and R4−R3≈2.667 RR_4-R_3 \approx 2.667\,R, so indeed 0.707 R<2.667 R.0.707\,R < 2.667\,R. Both parts are satisfied, therefore Option D is correct.

Hence, the correct answer is Option D.

Tagged Electric potential and potential energy. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicElectric potential and potential energy
TypeMultiple choice