RankRizz
JEE MAIN 2021 · 27 AUG S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2021 Physics question — Electric field of continuous charge distributions

Figure shows a rod ABAB, which is bent in a 120° circular arc of radius RR. A charge (−Q)(-Q) is uniformly distributed over rod AB. What is the electric field E⃗\vec{E} at the centre of curvature O?

Figure for JEE Main 2021 Physics question on Electric field of continuous charge distributions
SOLUTION

We need to find the maximum mass mpanm_{\text{pan}} that can be placed in the pan without breaking either of the two wires, W1W_1 or W2W_2.

1. Identify the Properties of the Wires

Both wires are made of the same material, meaning they share the same breaking stress limit:

  • Breaking Stress (σmax\sigma_{\text{max}}): 1.25×109 N m−21.25 \times 10^9\text{ N m}^{-2}
  • Area of cross-section of W1W_1 (A1A_1): 8×10−7 m28 \times 10^{-7}\text{ m}^2
  • Area of cross-section of W2W_2 (A2A_2): 4×10−7 m24 \times 10^{-7}\text{ m}^2

2. Calculate the Maximum Tension Capacity for Each Wire

The maximum tension (TmaxT_{\text{max}}) a wire can sustain before breaking is given by the formula:

Tmax=σmax×AT_{\text{max}} = \sigma_{\text{max}} \times A

  • For Wire 1 (W1W_1):

    T1,max=(1.25×109)×(8×10−7)=10×102=1000 NT_{1,\text{max}} = (1.25 \times 10^9) \times (8 \times 10^{-7}) = 10 \times 10^2 = 1000\text{ N}

  • For Wire 2 (W2W_2):

    T2,max=(1.25×109)×(4×10−7)=5×102=500 NT_{2,\text{max}} = (1.25 \times 10^9) \times (4 \times 10^{-7}) = 5 \times 10^2 = 500\text{ N}


3. Formulate Tension Equations Based on the Masses

Let mm be the maximum mass added to the pan. The tensions experienced by the two wires under static equilibrium are determined by the hanging loads beneath them:

  • Tension in Wire 2 (T2T_2): It supports the 10 kg10\text{ kg} mass and the pan with its added mass mm.

    T2=(10+m)g=(10+m)×10=100+10mT_2 = (10 + m)g = (10 + m) \times 10 = 100 + 10m

  • Tension in Wire 1 (T1T_1): It supports everything below it—the 20 kg20\text{ kg} mass, the 10 kg10\text{ kg} mass, and the pan with mass mm.

    T1=(20+10+m)g=(30+m)×10=300+10mT_1 = (20 + 10 + m)g = (30 + m) \times 10 = 300 + 10m


4. Determine the Safe Mass Limit for Each Wire

To avoid breaking, the actual tension in each wire must not exceed its maximum capacity:

Condition for Wire 1 (W1W_1):

T1≤T1,maxT_1 \le T_{1,\text{max}}

300+10m≤1000  ⟹  10m≤700  ⟹  m≤70 kg300 + 10m \le 1000 \implies 10m \le 700 \implies m \le 70\text{ kg}

Condition for Wire 2 (W2W_2):

T2≤T2,maxT_2 \le T_{2,\text{max}}

100+10m≤500  ⟹  10m≤400  ⟹  m≤40 kg100 + 10m \le 500 \implies 10m \le 400 \implies m \le 40\text{ kg}


5. Select the Limiting Constraint

To ensure neither wire breaks, we must choose the smaller value of the two mass constraints. If the mass exceeds 40 kg40\text{ kg}, wire W2W_2 will snap first.

Therefore, the maximum safe mass that can be added to the pan is exactly 40 kg40\text{ kg}.

Final Answer: 40

Tagged Electric field of continuous charge distributions. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicElectric field of continuous charge distributions
TypeMultiple choice