RankRizz
JEE MAIN 2013 · 07 APR ONLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2013 Physics question — Magnetic flux, Faraday's law and Lenz's law

A circular loop of radius 0.3 cm lies parallel to a much bigger circular loop of radius 20 cm. The centre of the small loop is on the axis of the bigger loop. The distance between their centres is 15 cm. If a current of 2.0 A flows through the smaller loop, then the flux linked with a bigger loop is:

SOLUTION

We begin by writing every given quantity in SI units.

The radius of the small loop is a=0.3 cm=0.3×10−2 m=3.0×10−3 m.a = 0.3\ \text{cm}=0.3\times 10^{-2}\ \text{m}=3.0\times 10^{-3}\ \text{m}.

The radius of the large loop is R=20 cm=20×10−2 m=0.20 m.R = 20\ \text{cm}=20\times 10^{-2}\ \text{m}=0.20\ \text{m}.

The distance between the two loop-centres measured along the common axis is d=15 cm=15×10−2 m=0.15 m.d = 15\ \text{cm}=15\times 10^{-2}\ \text{m}=0.15\ \text{m}.

The current in the small loop is I=2.0 A.I = 2.0\ \text{A}.

Because the small loop is much smaller than every other length involved (a≪d and a≪R),(a \ll d \ \text{and}\ a \ll R), it is quite accurate to regard the small loop as a magnetic dipole situated on the axis. Its magnetic dipole moment is, by definition,

m=I πa2.m = I\,\pi a^{2}.

A magnetic dipole produces an azimuthal vector potential AϕA_{\phi} at a point whose cylindrical co-ordinates relative to the dipole are (ρ,ϕ,z)(\rho ,\phi ,z):

Aϕ=μ04π m ρ(ρ2+z2)3/2.A_{\phi} = \frac{\mu_{0}}{4\pi}\, \frac{m\,\rho}{\left(\rho^{2}+z^{2}\right)^{3/2}}.

For the large loop we have ρ=R\rho = R and z=dz = d, so its entire circumference lies on the circle where the above potential has the value

Aϕ(R,d)=μ04π  m R(R2+d2)3/2.A_{\phi}(R,d) = \frac{\mu_{0}}{4\pi}\; \frac{m\,R}{\left(R^{2}+d^{2}\right)^{3/2}}.

The magnetic flux linked with the large loop equals the circulation of the vector potential around the loop (Stokes’ theorem):

Φ=∮A⋅dl=2πR Aϕ(R,d).\Phi = \oint \mathbf{A}\cdot d\mathbf{l} = 2\pi R\,A_{\phi}(R,d).

Substituting the expression for AϕA_{\phi} just written, we get

Φ=2πR(μ04π  m R(R2+d2)3/2)=μ0 m R22(R2+d2)3/2.\Phi = 2\pi R \left( \frac{\mu_{0}}{4\pi}\; \frac{m\,R}{\left(R^{2}+d^{2}\right)^{3/2}} \right) = \frac{\mu_{0}\,m\,R^{2}}{2\left(R^{2}+d^{2}\right)^{3/2}}.

Now we replace mm by I πa2I\,\pi a^{2}:

Φ=μ0 I πa2 R22(R2+d2)3/2.\Phi = \frac{\mu_{0}\,I\,\pi a^{2}\,R^{2}} {2\left(R^{2}+d^{2}\right)^{3/2}}.

This expression contains only known quantities, so we substitute the numerical values one by one.

First, the constant μ0=4π×10−7 H m−1.\mu_{0}=4\pi \times 10^{-7}\ \text{H m}^{-1}. Half of this is μ02=2π×10−7 H m−1.\frac{\mu_{0}}{2}=2\pi \times 10^{-7}\ \text{H m}^{-1}.

The factor πa2\pi a^{2} is

πa2=π (3.0×10−3)2=π (9.0×10−6)=9π×10−6 m2.\pi a^{2}=\pi\,(3.0\times 10^{-3})^{2} =\pi\,(9.0\times 10^{-6}) =9\pi\times 10^{-6}\ \text{m}^{2}.

Multiplying by R2R^{2} gives

πa2R2=(9π×10−6)(0.20)2=(9π×10−6)(0.040)=0.36π×10−6=3.6π×10−7 m4.\pi a^{2}R^{2}=\left(9\pi\times 10^{-6}\right)\left(0.20\right)^{2} =\left(9\pi\times 10^{-6}\right)\left(0.040\right) =0.36\pi\times 10^{-6}=3.6\pi\times 10^{-7}\ \text{m}^{4}.

Next we incorporate the current I=2 AI=2\ \text{A}:

I πa2R2=2×3.6π×10−7=7.2π×10−7 A m4.I\,\pi a^{2}R^{2}=2\times 3.6\pi\times 10^{-7} =7.2\pi\times 10^{-7}\ \text{A m}^{4}.

Multiplying by μ0/2\mu_{0}/2 gives the whole numerator:

(μ02)(I πa2R2)=(2π×10−7)(7.2π×10−7)=14.4π2×10−14 Wb m−1.\left(\frac{\mu_{0}}{2}\right) \left(I\,\pi a^{2}R^{2}\right) =\left(2\pi\times 10^{-7}\right) \left(7.2\pi\times 10^{-7}\right) =14.4\pi^{2}\times 10^{-14}\ \text{Wb m}^{-1}.

Since π2≈9.8696\pi^{2}\approx 9.8696, the numerical value becomes

14.4π2×10−14=14.4×9.8696×10−14≈142.1×10−14=1.421×10−12 Wb m−1.14.4\pi^{2}\times 10^{-14} =14.4\times 9.8696\times 10^{-14} \approx 142.1\times 10^{-14} =1.421\times 10^{-12}\ \text{Wb m}^{-1}.

We now turn to the denominator:

R2+d2=0.202+0.152=0.040+0.0225=0.0625,R^{2}+d^{2}=0.20^{2}+0.15^{2}=0.040+0.0225=0.0625,

and thus

(R2+d2)3/2=(0.0625)3/2=0.0625×0.0625=0.25×0.0625=0.015625.\left(R^{2}+d^{2}\right)^{3/2} =(0.0625)^{3/2} =\sqrt{0.0625}\times 0.0625 =0.25\times 0.0625 =0.015625.

Finally, the flux is

Φ=1.421×10−120.015625≈9.09×10−11 weber.\Phi =\frac{1.421\times 10^{-12}} {0.015625} \approx 9.09\times 10^{-11}\ \text{weber}.

Keeping only two significant figures,

Φ≈9.1×10−11 Wb.\Phi\approx 9.1\times 10^{-11}\ \text{Wb}.

Comparing with the options supplied, this value corresponds to Option C.

Hence, the correct answer is Option C.

Tagged Magnetic flux, Faraday's law and Lenz's law. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicMagnetic flux, Faraday's law and Lenz's law
TypeMultiple choice