RankRizz
JEE MAIN 2020 · 03 SEP S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2020 Physics question — Magnetic flux, Faraday's law and Lenz's law

A uniform magnetic field B exists in a direction perpendicular to the plane of a square loop made of a metal wire. The wire has a diameter of 4 mm and a total length of 30 cm. The magnetic field changes with time at a steady rate dB/dt = 0.032 Ts−1^{-1}. The induced current in the loop is close to (Resistivity of the metal wire is 1.23 ×\times 10−8^{-8} Ω\Omegam)

SOLUTION

We are given a metal wire of total length L=30 cm=0.30 mL = 30\ \text{cm} = 0.30\ \text{m} which is bent to form a square loop. A uniform magnetic field BB is perpendicular to the plane of the loop and is changing steadily at the rate dBdt=0.032 T s−1\dfrac{dB}{dt}=0.032\ {\rm T\,s^{-1}}. The resistivity of the metal is ρ=1.23×10−8 Ωm\rho = 1.23 \times 10^{-8}\ \Omega\text{m} and the diameter of the wire is d=4 mm=4×10−3 md = 4\ \text{mm} = 4 \times 10^{-3}\ \text{m}.

First we determine the length of one side of the square. Because the wire forms a square, its four sides have equal length, so

4 ℓ=L    ⟹    ℓ=L4=0.30 m4=0.075 m=7.5 cm.4\,\ell = L \;\;\Longrightarrow\;\; \ell = \frac{L}{4} = \frac{0.30\ \text{m}}{4} = 0.075\ \text{m} = 7.5\ \text{cm}.

Now we find the area AA enclosed by the square loop:

A=ℓ2=(0.075 m)2=0.005625 m2.A = \ell^{2} = (0.075\ \text{m})^{2} = 0.005625\ \text{m}^{2}.

The changing magnetic field produces an emf according to Faraday's law. We first state Faraday’s law in magnitude form:

E=∣dΦdt∣,\mathcal{E}= \left|\frac{d\Phi}{dt}\right|,

where the flux Φ\Phi through the loop is Φ=BA\Phi = BA. Because the field is perpendicular to the plane, the cosine factor is unity, and we can write

dΦdt=A dBdt.\frac{d\Phi}{dt} = A\,\frac{dB}{dt}.

Substituting the given numbers,

dΦdt=(0.005625 m2) (0.032 T s−1)=1.8×10−4 Wb s−1=1.8×10−4 V.\frac{d\Phi}{dt} = (0.005625\ \text{m}^{2})\,(0.032\ \text{T\,s}^{-1}) = 1.8 \times 10^{-4}\ \text{Wb\,s}^{-1} = 1.8 \times 10^{-4}\ \text{V}.

Thus the induced emf is

E=1.8×10−4 V.\mathcal{E} = 1.8 \times 10^{-4}\ \text{V}.

Next we calculate the electrical resistance of the square loop. The cross-sectional area SS of the wire is obtained from its radius rr. The radius is half the diameter:

r=d2=4×10−3 m2=2×10−3 m.r = \frac{d}{2} = \frac{4 \times 10^{-3}\ \text{m}}{2} = 2 \times 10^{-3}\ \text{m}.

So

S=πr2=π (2×10−3 m)2=π (4×10−6) m2=4π×10−6 m2≈1.2566×10−5 m2.S = \pi r^{2} = \pi\,(2 \times 10^{-3}\ \text{m})^{2} = \pi\,(4 \times 10^{-6})\ \text{m}^{2} = 4\pi \times 10^{-6}\ \text{m}^{2} \approx 1.2566 \times 10^{-5}\ \text{m}^{2}.

The resistance RR of a uniform wire is given by the formula

R=ρ LS.R = \rho\,\frac{L}{S}.

Substituting the known values,

R=(1.23×10−8 Ωm)0.30 m1.2566×10−5 m2=3.69×10−9 Ωm1.2566×10−5 m2≈2.94×10−4 Ω=0.000294 Ω.R = \bigl(1.23 \times 10^{-8}\ \Omega\text{m}\bigr) \frac{0.30\ \text{m}}{1.2566 \times 10^{-5}\ \text{m}^{2}} = \frac{3.69 \times 10^{-9}\ \Omega\text{m}}{1.2566 \times 10^{-5}\ \text{m}^{2}} \approx 2.94 \times 10^{-4}\ \Omega = 0.000294\ \Omega.

The induced current II in the loop is obtained from Ohm’s law, I=ERI = \dfrac{\mathcal{E}}{R}. Hence

I=1.8×10−4 V2.94×10−4 Ω≈0.612 A.I = \frac{1.8 \times 10^{-4}\ \text{V}}{2.94 \times 10^{-4}\ \Omega} \approx 0.612\ \text{A}.

This value rounds to approximately 0.61 A0.61\ \text{A}.

Hence, the correct answer is Option B.

Tagged Magnetic flux, Faraday's law and Lenz's law. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicMagnetic flux, Faraday's law and Lenz's law
TypeMultiple choice