RankRizz
JEE MAIN 2026 · 23 JAN S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2026 Physics question — Magnetic flux, Faraday's law and Lenz's law

Suppose a long solenoid of 100 cm length, radius 2 cm having 500 turns per unit length, carries a current I=10sin⁡(ωt)I= 10 \sin (\omega t) A, where ω\omega = 1000 rad/s. A circular conducting loop (B) of radius 1 cm coaxially slided through the solenoid at a speed v=1cm/sv = 1 cm/s. The r.m.s. current through the loop when the coil B is inserted 10 cm inside the solenoid is α/2μA\alpha/\sqrt{2}\mu A. The value of α\alpha is ______.
[Resistance of the loop= 10Ω\Omega]

SOLUTION

Step 1: Magnetic field inside the long solenoid

The magnetic field BB produced by a long solenoid is:

B=μ0nIB = \mu_0 n I

Given I=I0sin⁡(ωt)I = I_0 \sin(\omega t), we substitute this into the equation:

B=μ0nI0sin⁡(ωt)B = \mu_0 n I_0 \sin(\omega t)

Step 2: Magnetic flux through the circular loop

The flux Φ\Phi linked with the inner coil (B) of radius rBr_Bis:

Φ=B⋅A=B⋅(πrB2)\Phi = B \cdot A = B \cdot (\pi r_B^2)

Φ=μ0nI0πrB2sin⁡(ωt)\Phi = \mu_0 n I_0 \pi r_B^2 \sin(\omega t)

Note: The sliding speed vv does not induce motional EMF because the field is uniform deep inside the solenoid, meaning dBdx=0\frac{dB}{dx} = 0.

Step 3: Induced EMF in the loop

By Faraday's Law, the magnitude of the induced EMF (ε\varepsilon) is:

ε=∣dΦdt∣=μ0nI0πrB2ωcos⁡(ωt)\varepsilon = \left| \frac{d\Phi}{dt} \right| = \mu_0 n I_0 \pi r_B^2 \omega \cos(\omega t)

The peak EMF (ε0\varepsilon_0) is the amplitude of this expression:

ε0=μ0nI0πrB2ω\varepsilon_0 = \mu_0 n I_0 \pi r_B^2 \omega

Step 4: Calculate Peak Current

The peak current i0i_0 is the peak EMF divided by the resistance RR:

i0=ε0R=μ0nI0πrB2ωRi_0 = \frac{\varepsilon_0}{R} = \frac{\mu_0 n I_0 \pi r_B^2 \omega}{R}

i0=(4π×10−7)×500×10×π(10−2)2×100010i_0 = \frac{(4\pi \times 10^{-7}) \times 500 \times 10 \times \pi (10^{-2})^2 \times 1000}{10}

i0=4π×10−7×5000×π×10−4×100010i_0 = \frac{4\pi \times 10^{-7} \times 5000 \times \pi \times 10^{-4} \times 1000}{10}

i0=20π2×10−410i_0 = \frac{20\pi^2 \times 10^{-4}}{10}

i0=2π2×10−5 Ai_0 = 2\pi^2 \times 10^{-5} \text{ A}

To convert this to microamperes (μA\mu\text{A}), multiply by 10610^6:

i0=20π2 μAi_0 = 20\pi^2 \ \mu\text{A}

\Step 5: RMS Current

The root-mean-square current is related to the peak current by irms=i02i_{rms} = \frac{i_0}{\sqrt{2}}:

irms=20π22 μAi_{rms} = \frac{20\pi^2}{\sqrt{2}} \ \mu\text{A}

irms=1972 μAi_{rms}=\frac{197}{\sqrt{2}} \ \mu\text{A}

Tagged Magnetic flux, Faraday's law and Lenz's law. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicMagnetic flux, Faraday's law and Lenz's law
TypeMultiple choice