RankRizz
JEE MAIN 2026 · 23 JAN S1+4 / −1MEDIUMTRANSCRIBED

JEE Main 2026 Physics question — Motional emf in moving rods and loops

A simple pendulum made of mass 10 g and a metallic wire of length 10 cm is suspended vertically in a uniform magnetic field of 2 T. The magnetic field direction is perpendicular to the plane of oscillations of the pendulum. If the pendulwn is released from an angle of 60° with vertical, then maximum induced EMF between the point of s uspension and point of oscillation is ______mV (Take g=10m/s2g= 10 m/s^{2})

SOLUTION

The pendulum consists of a metallic wire of length L=10 cm=0.1 mL = 10 \text{ cm} = 0.1 \text{ m} and a bob of mass m=10 g=0.01 kgm = 10 \text{ g} = 0.01 \text{ kg}, oscillating in a uniform magnetic field B=2 TB = 2 \text{ T} perpendicular to the plane of oscillation. The maximum induced EMF occurs when the angular velocity is maximum, which is at the lowest point of the swing.

The induced EMF in a rotating conductor of length LL about one end in a uniform magnetic field BB perpendicular to the plane of rotation is given by:

E=12BωL2\mathcal{E} = \frac{1}{2} B \omega L^2

where ω\omega is the angular velocity.

To find the maximum angular velocity ωmax\omega_{\text{max}}, use conservation of energy. The initial angle is θ0=60∘\theta_0 = 60^\circ. The height hh above the lowest point is:

h=L(1−cos⁡θ0)h = L (1 - \cos \theta_0)

Substitute cos⁡60∘=0.5\cos 60^\circ = 0.5:

h=0.1×(1−0.5)=0.1×0.5=0.05 mh = 0.1 \times (1 - 0.5) = 0.1 \times 0.5 = 0.05 \text{ m}

The potential energy at the initial position converts to kinetic energy at the lowest point:

mgh=12mvmax2m g h = \frac{1}{2} m v_{\text{max}}^2

where g=10 m/s2g = 10 \text{ m/s}^2. Solve for vmaxv_{\text{max}}:

vmax=2gh=2×10×0.05=1=1 m/sv_{\text{max}} = \sqrt{2 g h} = \sqrt{2 \times 10 \times 0.05} = \sqrt{1} = 1 \text{ m/s}

The maximum angular velocity ωmax\omega_{\text{max}} is related to vmaxv_{\text{max}} by:

ωmax=vmaxL=10.1=10 rad/s\omega_{\text{max}} = \frac{v_{\text{max}}}{L} = \frac{1}{0.1} = 10 \text{ rad/s}

Now substitute into the EMF formula:

Emax=12BωmaxL2=12×2×10×(0.1)2\mathcal{E}_{\text{max}} = \frac{1}{2} B \omega_{\text{max}} L^2 = \frac{1}{2} \times 2 \times 10 \times (0.1)^2

Calculate step by step:

(0.1)2=0.01(0.1)^2 = 0.01

Emax=12×2×10×0.01=1×10×0.01=0.1 V\mathcal{E}_{\text{max}} = \frac{1}{2} \times 2 \times 10 \times 0.01 = 1 \times 10 \times 0.01 = 0.1 \text{ V}

Convert to millivolts: 0.1 V=100 mV0.1 \text{ V} = 100 \text{ mV}.

Thus, the maximum induced EMF is 100 mV100 \text{ mV}.

Tagged Motional emf in moving rods and loops. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicMotional emf in moving rods and loops
TypeNumerical answer