The current flowing through the resistor is A. The value of is ________

step 1: identify key nodes
Let node C be reference (0 V).
We want current through the 1 Ω resistor (between left junction and C).
step 2: simplify structure
Notice:
• B-C = 2 Ω
• D-C = 2 Ω
• A connects to B and D via 4 Ω each
• C connects to E (5 V source)
• A to C branch has: 10 V source + 1 Ω
step 3: use symmetry
The top and bottom halves (via 4Ω-2Ω and 4Ω-2Ω) are symmetric so B and D are at same potential.
Thus currents through those two paths are equal.
So equivalent of those two paths from A to C:
Each path: 4 + 2 = 6 Ω
Two identical 6 Ω in parallel equivalent = 3 Ω
step 4: reduced circuit
Now between A and C we have:
• one branch: 10 V source in series with 1 Ω
• another branch: 3 Ω
And C to E is just a wire with 5 V source setting potential.
step 5: set node voltages
Let C = 0 V
Then E = 5 V
Let
step 6: currents from A to C
Branch 1 (via 3Ω):
Branch 2 (via 1Ω + 10V source):
Careful with polarity: from diagram, going A C, the 10 V source gives a drop.
So:
step 7: KCL at node A
Total current leaving A = 0:
Multiply by 3:
step 8: current through 1Ω
Magnitude = 2.5 A
step 9: match form
I = n/10
2.5 = n/10
n = 25
Tagged Kirchhoff's laws and circuit analysis. Machine-assigned, so read it as a strong shortlist rather than a verdict.