RankRizz
JEE MAIN 2016 · 09 APR ONLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2016 Physics question — Galvanometer conversion to ammeter and voltmeter

To know the resistance GG of a galvanometer by half deflection method, a battery of emf VEV_E and resistance RR is used to deflect the galvanometer by angle θ\theta. If a shunt of resistance SS is needed to get half deflection the GG, RR and SS are related by the equation:

SOLUTION

First let us note the condition for full deflection. When the galvanometer of resistance GG is placed in series with the known resistance RR and the battery of emf VEV_E, the current through the circuit is IgI_g (the subscript “g” stands for “galvanometer”). Ohm’s law gives

VE=Ig (R+G).V_E = I_g\,(R + G).

Because the deflection is proportional to the current, this current IgI_g produces the full-scale deflection θ\theta.

Now we connect a shunt of resistance SS in parallel with the galvanometer and adjust its value so that the observed deflection becomes exactly one-half, i.e. θ2\dfrac{\theta}{2}. Therefore the current that now passes through the galvanometer is only half of the original value:

Ig′=Ig2.I_g' = \dfrac{I_g}{2}.

The galvanometer and the shunt are in parallel, so they have the same potential difference across them. The current in the shunt will be the remainder of the total current II supplied by the battery. Hence, using current division we have

I−Ig′=I−Ig2I - I_g' = I - \dfrac{I_g}{2}

through the shunt, and the equality of the two parallel branch voltages gives

(current in galvanometer)×G  =  (current in shunt)×S.\text{(current in galvanometer)} \times G \;=\; \text{(current in shunt)} \times S.

Substituting the actual currents, we obtain

(Ig2)G=(I−Ig2)S.\left(\dfrac{I_g}{2}\right)G = \left(I - \dfrac{I_g}{2}\right)S.

Solving this relation for the total current II:

Ig2 G=S I−S Ig2\dfrac{I_g}{2}\,G = S\,I - \dfrac{S\,I_g}{2}

⇒  S I=Ig2 G+S Ig2\Rightarrow\; S\,I = \dfrac{I_g}{2}\,G + \dfrac{S\,I_g}{2}

⇒  I=Ig2(GS+1)\Rightarrow\; I = \dfrac{I_g}{2}\left( \dfrac{G}{S} + 1 \right)

⇒  I=Ig2(G+SS).\Rightarrow\; I = \dfrac{I_g}{2}\left( \dfrac{G + S}{S} \right).

The battery emf has not changed, so VEV_E must still equal the drop across the external resistance RR plus the drop across the parallel combination of GG and SS. The equivalent resistance of the parallel pair is

Req=G SG+S.R_{\text{eq}} = \dfrac{G\,S}{G + S}.

Hence, for the half-deflection condition

VE=I(R+G SG+S).V_E = I\left(R + \dfrac{G\,S}{G + S}\right).

But from the initial (full-deflection) arrangement we already have VE=Ig (R+G)V_E = I_g\,(R + G). Equating the two expressions for VEV_E gives

Ig (R+G)=I(R+G SG+S).I_g\,(R + G) = I\left(R + \dfrac{G\,S}{G + S}\right).

Substituting the earlier expression for II, namely I=Ig2(G+SS)I = \dfrac{I_g}{2}\left(\dfrac{G + S}{S}\right), we get

Ig (R+G)=Ig2(G+SS)(R+G SG+S).I_g\,(R + G) = \dfrac{I_g}{2}\left(\dfrac{G + S}{S}\right)\left(R + \dfrac{G\,S}{G + S}\right).

Cancel the common factor IgI_g on both sides:

(R+G)=12(G+SS)(R+G SG+S).(R + G) = \dfrac{1}{2}\left(\dfrac{G + S}{S}\right)\left(R + \dfrac{G\,S}{G + S}\right).

Multiply both sides by 2S2S to clear the fraction:

2S(R+G)=(G+S)(R+G SG+S).2S(R + G) = (G + S)\left(R + \dfrac{G\,S}{G + S}\right).

Now distribute on the right. First term:

(G+S) R=R G+R S.(G + S)\,R = R\,G + R\,S.

Second term:

(G+S)(G SG+S)=G S(G + S)\left(\dfrac{G\,S}{G + S}\right) = G\,S

because the factor (G+S)(G + S) cancels. Adding the two results, the right-hand side becomes

R G+R S+G S.R\,G + R\,S + G\,S.

So we have

2S(R+G)=R G+R S+G S.2S(R + G) = R\,G + R\,S + G\,S.

Expand the left-hand side:

2S(R+G)=2S R+2S G.2S(R + G) = 2S\,R + 2S\,G.

Bring every term to one side to simplify:

2S R+2S G−R S−R G−G S=0.2S\,R + 2S\,G - R\,S - R\,G - G\,S = 0.

Group like terms:

(2S R−R S)+(2S G−G S)−R G=0\bigl(2S\,R - R\,S\bigr) + \bigl(2S\,G - G\,S\bigr) - R\,G = 0

⇒S R+S G−R G=0.\Rightarrow S\,R + S\,G - R\,G = 0.

Finally, factor out the common terms:

S(R+G)=R G.S(R + G) = R\,G.

This is exactly the relation demanded in option A.

Hence, the correct answer is Option A.

Tagged Galvanometer conversion to ammeter and voltmeter. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicGalvanometer conversion to ammeter and voltmeter
TypeMultiple choice