The supply voltage to a room is 120 V. The resistance of the lead wires is 6 . A 60 W bulb is already switched on. What is the decrease of voltage across the bulb, when a 240 W heater is switched on in parallel to the bulb?
We have a mains (supply) voltage of feeding the room through lead-in wires whose total resistance is given as . Any current that flows must first pass through these leads, so whatever appliances are inside the room receive a slightly smaller voltage than the full 120 V because part of the supply voltage is dropped across .
A 60 W incandescent bulb is already glowing. Because every manufacturer rates a lamp at the voltage that should appear directly across it, we can find its resistance from the power formula
so
Substituting the rating figures of the bulb,
First we calculate the situation before the heater is switched on. The circuit is simply the lead resistance in series with the bulb resistance , and the current through the series combination is
The voltage that actually appears across the bulb is then
Thus the initial drop across the lead wires is , but we keep the exact figure for later comparison.
Now a 240 W heater is added in parallel with the bulb. We first find the heater’s resistance from the same power formula:
The bulb and heater form a parallel combination. The equivalent resistance of two resistors in parallel is given by
so
Now the supply sees the series combination of the lead resistance and the equivalent load resistance . Hence the total current drawn from the mains after the heater is switched on is
The voltage that now reaches the parallel junction (and therefore appears across both the bulb and the heater) is
Finally, the decrease in the bulb’s voltage is
Hence, the correct answer is Option B.
Tagged Electric power and heating effect of current. Machine-assigned, so read it as a strong shortlist rather than a verdict.