RankRizz
JEE MAIN 2026 · 04 APR S1+4 / −1EASYTRANSCRIBED

JEE Main 2026 Physics question — Galvanometer conversion to ammeter and voltmeter

A voltmeter with internal resistance of x  Ωx \; \Omega can be used to measure upto 20 V. In order to increase its measuring range to 30 V, the required modification is :

SOLUTION

A voltmeter is basically a galvanometer designed to draw as little current as possible from the circuit under test. Its scale is calibrated such that the full-scale deflection occurs when the potential difference across its own (internal) resistance is equal to the rated range.

Given data for the original voltmeter:
internal resistance Rv=x ΩR_v = x \,\Omega
maximum readable voltage (full-scale) Vold=20 VV_{\text{old}} = 20 \text{ V}

We want to extend the range to a new value
Vnew=30 VV_{\text{new}} = 30 \text{ V}

Method: Add a resistance in series (called a multiplier resistance) so that the larger voltage is divided between the voltmeter and the added resistor, while the same full-scale current still flows through the meter.

Let the required series resistance be RsR_s. At full-scale current IfsI_{\text{fs}} we have:

For the original meter alone:
Ifs=VoldRv=20x−(1)I_{\text{fs}} = \frac{V_{\text{old}}}{R_v} = \frac{20}{x} \quad -(1)

After adding RsR_s in series, the same current IfsI_{\text{fs}} must flow when the applied voltage is Vnew=30 VV_{\text{new}} = 30 \text{ V}:

Vnew=Ifs (Rv+Rs)−(2)V_{\text{new}} = I_{\text{fs}}\,(R_v + R_s) \quad -(2)

Substitute IfsI_{\text{fs}} from (1)(1) into (2)(2):

30=20x (Rv+Rs)30 = \frac{20}{x}\,(R_v + R_s)

But Rv=xR_v = x, so

30=20x (x+Rs)  ⟹  30=20(1+Rsx)30 = \frac{20}{x}\,(x + R_s) \; \Longrightarrow \; 30 = 20\left(1 + \frac{R_s}{x}\right)

Divide both sides by 20:

3020=1+Rsx    ⟹    32=1+Rsx\frac{30}{20} = 1 + \frac{R_s}{x} \;\; \Longrightarrow \;\; \frac{3}{2} = 1 + \frac{R_s}{x}

Hence

Rsx=32−1=12\frac{R_s}{x} = \frac{3}{2} - 1 = \frac{1}{2}

⇒  Rs=x2\Rightarrow \; R_s = \frac{x}{2}

Therefore, connecting a series resistor of x2 Ω\dfrac{x}{2}\,\Omega extends the voltmeter range from 20 V to 30 V.

Adding any resistor in parallel would reduce, not increase, the effective resistance and hence the measurable voltage, so options B and D are unsuitable. Option C gives too high a value, leading to a 40-V range. Thus the correct choice is:

Option A which is: connect resistor of x2  Ω\frac{x}{2} \; \Omega in series.

Tagged Galvanometer conversion to ammeter and voltmeter. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicGalvanometer conversion to ammeter and voltmeter
TypeMultiple choice