RankRizz
JEE MAIN 2022 · 28 JUL S1+4 / −1MEDIUMTRANSCRIBED

JEE Main 2022 Physics question — Potentiometer

As shown in the figure, a potentiometer wire of resistance 20 Ω\Omega and length 300 cm is connected with resistance box (R.B.) and a standard cell of emf 4 V. For a resistance 'R' of resistance box introduced into the circuit, the null point for a cell of 20 mV is found to be 60 cm. The value of 'R' is _____ Ω\Omega.

Figure for JEE Main 2022 Physics question on Potentiometer
SOLUTION

We need to determine the value of the resistance RR introduced in the resistance box (R.B.) of the potentiometer circuit so that a cell of EMF 20 mV20\text{ mV} balances at a length of 60 cm60\text{ cm}.

1. Identify the Given Parameters

  • EMF of the standard primary cell (VsV_s) = 4 V4\text{ V}
  • Resistance of the potentiometer wire (RwR_w) = 20 Ω20\ \Omega
  • Total length of the potentiometer wire (LL) = 300 cm300\text{ cm}
  • EMF of the secondary cell (EE) = 20 mV=20×10−3 V20\text{ mV} = 20 \times 10^{-3}\text{ V}
  • Balancing length (ll) = 60 cm60\text{ cm}

2. Understand the Principle of a Potentiometer

The potential difference balanced across the length ll of the wire is directly proportional to that length. The balancing condition is given by:

E=k⋅lE = k \cdot l

Where kk is the potential gradient (potential drop per unit length) of the potentiometer wire, defined as:

k=VwLk = \frac{V_w}{L}

Here, VwV_w is the total voltage drop across the entire potentiometer wire.

3. Calculate the Required Potential Gradient (kk)

Using the balancing condition for the secondary cell:

20×10−3 V=k×60 cm20 \times 10^{-3}\text{ V} = k \times 60\text{ cm}

k=20×10−3 V60 cm=13000 V cm−1k = \frac{20 \times 10^{-3}\text{ V}}{60\text{ cm}} = \frac{1}{3000}\text{ V cm}^{-1}

Now, calculate the total voltage drop (VwV_w) across the entire 300 cm300\text{ cm} wire:

Vw=k×L=13000 V cm−1×300 cm=0.1 VV_w = k \times L = \frac{1}{3000}\text{ V cm}^{-1} \times 300\text{ cm} = 0.1\text{ V}

4. Determine the Resistance RR

The main primary circuit forms a series network consisting of the standard cell (4 V4\text{ V}), the resistance box (RR), and the potentiometer wire (Rw=20 ΩR_w = 20\ \Omega). Using the voltage divider rule, the voltage drop across the wire is:

Vw=Vs×(RwR+Rw)V_w = V_s \times \left( \frac{R_w}{R + R_w} \right)

Substitute the known values into the equation:

0.1=4×(20R+20)0.1 = 4 \times \left( \frac{20}{R + 20} \right)

0.1=80R+200.1 = \frac{80}{R + 20}

Cross-multiplying to solve for RR:

0.1(R+20)=800.1(R + 20) = 80

R+20=800.1R + 20 = \frac{80}{0.1}

R+20=800R + 20 = 800

R=800−20=780 ΩR = 800 - 20 = 780\ \Omega

Conclusion

The required resistance to be introduced in the resistance box is 780 Ω\Omega.

Tagged Potentiometer. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicPotentiometer
TypeNumerical answer