We start by recalling the resistance formula for a uniform wire:
R=ρAL
where ρ is the resistivity, L is the length and A is the cross-sectional area.
The two wires (iron and copper-nickel alloy) have
diameter d=2 mm=0.2 cm,
so the radius is
r=2d=1 mm=0.1 cm.
The area of a circle is A=πr2, hence
A=π(0.1 cm)2=π(0.01) cm2=0.01π cm2.
Both wires are required to have the same unknown length L and are connected in parallel.
For two resistances R1 and R2 in parallel we use
Req1=R11+R21.
The given resistivities are
ρFe=12 μΩ cm=12×10−6 Ω cm,
ρCu-Ni=51 μΩ cm=51×10−6 Ω cm.
Therefore the individual resistances are
RFe=ρFeAL,RCu-Ni=ρCu-NiAL.
The equivalent resistance is given to be
Req=3 Ω.
Substituting the expressions for the two resistances into the parallel-combination formula, we get
31=ρFeAL1+ρCu-NiAL1=LA(ρFe1+ρCu-Ni1).
Now we isolate L:
31=LA(ρFeρCu-NiρFe+ρCu-Ni)
⇒L=3AρFeρCu-NiρFe+ρCu-Ni.
We substitute the numerical values:
A=0.01π cm2,ρFe=12×10−6 Ω cm,ρCu-Ni=51×10−6 Ω cm.
First, add the resistivities:
ρFe+ρCu-Ni=(12+51)×10−6=63×10−6 Ω cm.
Next, multiply them:
ρFeρCu-Ni=(12×10−6)(51×10−6)=612×10−12 Ω2 cm2.
Insert everything into the length expression:
L=3(0.01π)612×10−1263×10−6=0.03π⋅63×10−6×612×10−121.
Simplifying the powers of ten:
10−1210−6=106,
so
L=0.03π⋅63⋅106×6121.
Compute the numerical factor:
0.03×63=1.89,
6121.89=0.0030882,
0.0030882×π≈0.009702.
Therefore
L≈0.009702×106 cm=9702 cm.
Finally convert centimetres to metres:
L=1009702 m≈97.0 m.
Hence, the correct answer is Option A.