RankRizz
JEE MAIN 2026 · 24 JAN S2+4 / −1EASYTRANSCRIBED

JEE Main 2026 Physics question — Galvanometer conversion to ammeter and voltmeter

A moving coil galvanometer of resistance 100Ω100\Omega shows a full scale deflection for a current of 1 mA. The value of resistance required to convert this galvanometer into an ammeter, showing full scale deflection for a current of 5 mA, is ____ Ω\Omega

SOLUTION

The galvanometer behaves like a resistor Rg=100ΩR_g = 100\Omega that can carry a maximum (full-scale) current of Ig=1 mA=0.001 AI_g = 1\text{ mA} = 0.001\text{ A}. To measure larger currents we connect a small resistance RsR_s in parallel with the galvanometer. This combination is called a shunt-type ammeter.

Let the required full-scale current of the ammeter be I=5 mA=0.005 AI = 5\text{ mA} = 0.005\text{ A}. When this current enters the parallel combination, part IgI_g flows through the galvanometer and the remainder IsI_s flows through the shunt:

I=Ig+IsI = I_g + I_s

Because the galvanometer and the shunt are in parallel, the voltage across each branch is the same:

Ig Rg=Is RsI_g\,R_g = I_s\,R_s −(1)-(1)

From the current relation, the shunt current is

Is=I−Ig=0.005−0.001=0.004 AI_s = I - I_g = 0.005 - 0.001 = 0.004\text{ A}

Substitute IgI_g, IsI_s and RgR_g into equation −(1)-(1) to obtain RsR_s:

Rs=Ig RgIs=0.001×1000.004=0.10.004=25ΩR_s = \frac{I_g\,R_g}{I_s} = \frac{0.001 \times 100}{0.004} = \frac{0.1}{0.004} = 25\Omega

Therefore, the resistance that must be connected in parallel with the galvanometer to convert it into an ammeter of full-scale 5 mA is 25Ω25\Omega.

Option C is correct.

Tagged Galvanometer conversion to ammeter and voltmeter. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicGalvanometer conversion to ammeter and voltmeter
TypeMultiple choice