RankRizz
JEE MAIN 2006TRANSCRIBED

JEE Main 2006 Physics question — Cells: emf, internal resistance and combinations

A thermocouple is made from two metals, Antimony and Bismuth. If one junction of the couple is kept hot and the other is kept cold then, an electric current will

SOLUTION

The phenomenon involved is the Seebeck effect: when the two junctions of a dissimilar-metal loop are kept at different temperatures, an emf EE is produced, driving a steady current around the closed circuit.

The magnitude and sign of the emf are obtained from
E  =  ∫TcTh(SA−SB) dT  =  (SA−SB)(Th−Tc)E \;=\; \int_{T_c}^{T_h} \left(S_{A}-S_{B}\right)\,dT \;=\; \left(S_{A}-S_{B}\right)(T_h-T_c)
where SA,SBS_{A}, S_{B} are the Seebeck (thermo-electric) coefficients of the two metals and Th>TcT_h \gt T_c.

Approximate room-temperature coefficients are
SSb≈−40 μV K−1,SBi≈−72 μV K−1S_{Sb} \approx -40\,\mu\text{V K}^{-1},\qquad S_{Bi} \approx -72\,\mu\text{V K}^{-1}

Hence
SSb−SBi  =  (−40)−(−72)  =  +32 μV K−1>0S_{Sb}-S_{Bi} \;=\; (-40) - (-72) \;=\; +32\,\mu\text{V K}^{-1} \gt 0
so the emf is positive when the Antimony junction is hotter: E=+32 (Th−Tc) μVE = +32\,(T_h-T_c)\,\mu\text{V}.

“Positive” here means that the Antimony wire is at higher electric potential than the Bismuth wire at the hot junction. Conventional current therefore leaves the Antimony wire, travels through the loop, and re-enters the Bismuth wire. Tracing the complete path shows that at the cold junction the current must go from the Antimony wire into the Bismuth wire.

Thus, when one junction is hot and the other cold, the current in the thermocouple flows
from Antimony to Bismuth at the cold junction.

Option A which is: flow from Antimony to Bismuth at the cold junction.

Tagged Cells: emf, internal resistance and combinations. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicCells: emf, internal resistance and combinations
TypeMultiple choice