RankRizz
JEE MAIN 2018 · 16 APR ONLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2018 Physics question — Galvanometer conversion to ammeter and voltmeter

In a circuit for finding the resistance of a galvanometer by half deflection method, a 6 V battery and a high resistance of 11 kΩ\Omega are used. The figure of merit of the galvanometer is 60 μ\muA division−1^{-1}. In the absence of shunt resistance, the galvanometer produces a deflection of θ\theta = 9 divisions when current flows in the circuit. The value of the shunt resistance that can cause the deflection of θ2\frac{\theta}{2}, is closest to:

SOLUTION

We have been told that the figure of merit of the galvanometer is k=60  μA division−1k = 60\;\mu\text{A division}^{-1}. By definition,

Ig=k θI_g = k\,\theta

where IgI_g is the current through the galvanometer and θ\theta is the scale deflection in divisions. Substituting θ=9\theta = 9 divisions,

Ig=60  μA×9=540  μA=5.4×10−4 AI_g = 60\;\mu\text{A}\times 9 = 540\;\mu\text{A}= 5.4\times10^{-4}\ \text{A}

In the first observation (no shunt connected) the 6 V battery drives this current through the series combination of the high resistance R=11 kΩ=11000 ΩR = 11\ \text{k}\Omega = 11000\ \Omega and the unknown resistance GG of the galvanometer itself. Applying Ohm’s law,

V=Ig (R+G)V = I_g\,(R+G)

Substituting V=6 VV = 6\ \text{V} and Ig=5.4×10−4 AI_g = 5.4\times10^{-4}\ \text{A},

6=5.4×10−4 (11000+G)6 = 5.4\times10^{-4}\,(11000 + G)

⇒  11000+G=65.4×10−4\Rightarrow\; 11000 + G = \frac{6}{5.4\times10^{-4}}

⇒  11000+G=11111.11\Rightarrow\; 11000 + G = 11111.11

⇒  G=11111.11−11000=111.11 Ω\Rightarrow\; G = 11111.11 - 11000 = 111.11\ \Omega

So, the resistance of the galvanometer is approximately G≈111 ΩG \approx 111\ \Omega.

We now connect a shunt resistance SS in parallel with the galvanometer. We wish the new deflection to be θ2\dfrac{\theta}{2}, i.e. the current through the galvanometer must fall to

Ig′=Ig2=5.4×10−42=2.7×10−4 AI_g' = \frac{I_g}{2} = \frac{5.4\times10^{-4}}{2}= 2.7\times10^{-4}\ \text{A}

Let RpR_p be the equivalent resistance of GG in parallel with SS. The formula for two resistances in parallel is first stated:

Rp=G SG+SR_p = \frac{G\,S}{G+S}

The total resistance in the circuit after the shunt is connected is R+RpR + R_p, so the total current delivered by the battery is

I=VR+Rp=611000+RpI = \frac{V}{R + R_p} = \frac{6}{11000 + R_p}

Current division tells us that the current through the galvanometer branch is

Ig′=I  SG+SI_g' = I\;\frac{S}{G+S}

We require Ig′=2.7×10−4 AI_g' = 2.7\times10^{-4}\ \text{A}. Substituting all relations step by step,

2.7×10−4=611000+Rp  SG+S2.7\times10^{-4} = \frac{6}{11000 + R_p}\;\frac{S}{G+S}

Because Rp=G SG+SR_p = \dfrac{G\,S}{G+S}, we replace it and obtain one single equation containing only the unknown SS:

2.7×10−4=611000+G SG+S  SG+S2.7\times10^{-4} = \frac{6}{11000 + \dfrac{G\,S}{G+S}}\;\frac{S}{G+S}

To eliminate the fractions we multiply both sides by the two denominators:

(2.7×10−4)(11000+G SG+S)(G+S)=6 S\Bigl(2.7\times10^{-4}\Bigr)\Bigl(11000 + \dfrac{G\,S}{G+S}\Bigr)(G+S) = 6\,S

It is more convenient, however, to work with the ratio Ig′Ig\dfrac{I_g'}{I_g}, because Ig′/Ig=1/2I_g'/I_g = 1/2 by design. Starting from

Ig′Ig=VR+Rp  SG+S  R+GV=R+GR+Rp  SG+S\frac{I_g'}{I_g} = \frac{V}{R+R_p}\;\frac{S}{G+S}\;\frac{R+G}{V}= \frac{R+G}{R+R_p}\;\frac{S}{G+S}

and demanding Ig′Ig=12\dfrac{I_g'}{I_g}= \dfrac12, we write

12=R+GR+Rp  SG+S\frac{1}{2} = \frac{R+G}{R+R_p}\;\frac{S}{G+S}

Now substitute the known numerical values R=11000 ΩR = 11000\ \Omega, G=111.11 ΩG = 111.11\ \Omega and Rp=G SG+SR_p = \dfrac{G\,S}{G+S}:

12=11000+111.1111000+111.11 S111.11+S  S111.11+S\frac12 = \frac{11000+111.11}{11000+\dfrac{111.11\,S}{111.11+S}}\;\frac{S}{111.11+S}

The numerator R+G=11000+111.11=11111.11R+G = 11000+111.11 = 11111.11, so a single explicit equation in SS is obtained:

12=11111.1111000+111.11 S111.11+S  S111.11+S\frac12 = \frac{11111.11}{11000+\dfrac{111.11\,S}{111.11+S}}\;\frac{S}{111.11+S}

Multiply both sides by the denominators to clear the fractions. First multiply by 2, then by the two bracketed terms:

2×11111.11 S=(11000+111.11 S111.11+S) (111.11+S)2\times 11111.11\,S = \Bigl(11000+\dfrac{111.11\,S}{111.11+S}\Bigr)\,(111.11+S)

Compute the left-hand side:

2×11111.11 S=22222.22 S2\times11111.11\,S = 22222.22\,S

For the right-hand side we distribute carefully:

(11000+111.11 S111.11+S) (111.11+S)=11000(111.11+S)+111.11 S\Bigl(11000+\dfrac{111.11\,S}{111.11+S}\Bigr)\,(111.11+S)=11000(111.11+S)+111.11\,S

Now insert this in the equality:

22222.22 S=11000(111.11+S)+111.11 S22222.22\,S = 11000(111.11+S)+111.11\,S

Expand the product containing 11000:

11000×111.11=122221011000\times111.11 = 1222210

and

11000×S=11000 S11000\times S = 11000\,S

so that the right-hand side becomes

1222210+11000 S+111.11 S=1222210+11111.11 S1222210 + 11000\,S + 111.11\,S = 1222210 + 11111.11\,S

Our equation is now purely linear in SS:

22222.22 S=1222210+11111.11 S22222.22\,S = 1222210 + 11111.11\,S

Bring the term 11111.11 S11111.11\,S to the left to collect like terms:

(22222.22−11111.11) S=1222210(22222.22 - 11111.11)\,S = 1222210

11111.11 S=122221011111.11\,S = 1222210

Finally divide to obtain SS:

S=122221011111.11≈110 ΩS = \frac{1222210}{11111.11} \approx 110\ \Omega

The answer that is the closest to this calculated value is 110 Ω\Omega.

Hence, the correct answer is Option D.

Tagged Galvanometer conversion to ammeter and voltmeter. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicGalvanometer conversion to ammeter and voltmeter
TypeMultiple choice