RankRizz
JEE MAIN 2019 · 11 JAN S2+4 / −1EASYTRANSCRIBED

JEE Main 2019 Physics question — Galvanometer conversion to ammeter and voltmeter

A galvanometer having a resistance of 20Ω20\Omega and 30 division on both sides has figure of merit 0.005 ampere/division. The resistance that should be connected in series such that it can be used as a voltmeter upto 15 volt, is:

SOLUTION

We are given a moving-coil galvanometer whose resistance is Rg=20ΩR_g = 20\Omega. The scale has 30 divisions on either side of the zero, so a full-scale deflection corresponds to a movement of 30 divisions. We are also told that the figure of merit (current needed for one-division deflection) is k=0.005 ampere/divisionk = 0.005\text{ ampere/division}.

The current required for full-scale deflection of the galvanometer, usually denoted by IgI_g, is obtained simply by multiplying the figure of merit by the number of divisions that constitute the full scale. Hence

Ig=k×(number of divisions)=0.005  A/div×30  divisions=0.15  A.I_g = k \times (\text{number of divisions}) = 0.005\;{\rm A/div}\times 30\;{\rm divisions} = 0.15\;{\rm A}.

To convert a galvanometer into a voltmeter that can read up to a given voltage Vmax⁡V_{\max}, we connect a suitable resistance in series with it. The idea is that, at the maximum voltage, the same full-scale current IgI_g must flow through the galvanometer. The total resistance that the source “sees’’ is therefore

Rtotal=Vmax⁡Ig.R_{\text{total}} = \frac{V_{\max}}{I_g}.

For this problem the desired range is up to Vmax⁡=15 VV_{\max} = 15\text{ V}, so

Rtotal=15 V0.15 A=100 Ω.R_{\text{total}} = \frac{15\ \text{V}}{0.15\ \text{A}} = 100\ \Omega.

This total resistance is made up of the galvanometer’s own resistance RgR_g in series with an external resistance RsR_s that we have to add. Therefore we write

Rtotal=Rg+Rs⟹Rs=Rtotal−Rg.R_{\text{total}} = R_g + R_s \quad\Longrightarrow\quad R_s = R_{\text{total}} - R_g.

Substituting the known numbers gives

Rs=100 Ω−20 Ω=80 Ω.R_s = 100\ \Omega - 20\ \Omega = 80\ \Omega.

Thus the required series resistance is 80 Ω80\ \Omega.

Hence, the correct answer is Option C.

Tagged Galvanometer conversion to ammeter and voltmeter. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicGalvanometer conversion to ammeter and voltmeter
TypeMultiple choice