RankRizz
JEE MAIN 2013 · 07 APR ONLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2013 Physics question — Modulation and demodulation

A diode detector is used to detect an amplitude modulated wave of 60% modulation by using a condenser of capacity 250 pico farad in parallel with a load resistance of 100 kilo ohm. Find the maximum modulated frequency which could be detected by it.

SOLUTION

We are given a diode envelope detector in which the shunt condenser (capacitor) has a capacitance

C=250 pFC = 250 \text{ pF}

and the load resistance is

R=100 kΩ.R = 100 \text{ k}\Omega.

The depth of modulation is quoted as 60 %, so the modulation index is

m=0.60.m = 0.60.

For a diode detector to follow the envelope of an amplitude-modulated (AM) signal faithfully, the RC time constant must be small enough so that the capacitor can discharge appreciably during one half-cycle of the lowest modulation frequency. A standard design inequality for avoiding diagonal clipping is stated as

R C  ≤  12π fm m,R\,C \;\le\; \frac{1}{2\pi\,f_m\,m},

where fmf_m is the highest (maximum) modulating signal frequency that we want the detector to reproduce without noticeable distortion and mm is the modulation index.

We want to know that limiting frequency fm(max⁡)f_{m(\max)}, so we solve the above inequality for fmf_m. Rewriting, we obtain

fm(max⁡)  =  12π R C m.f_{m(\max)} \;=\; \frac{1}{2\pi\,R\,C\,m}.

Now we substitute the numerical values, first converting every quantity to SI units:

R=100 kΩ  =  100×103  Ω=1.0×105  Ω,R = 100 \text{ k}\Omega \;=\; 100 \times 10^3 \;\Omega = 1.0 \times 10^5 \;\Omega,

C=250 pF  =  250×10−12 F=2.50×10−10 F.C = 250 \text{ pF} \;=\; 250 \times 10^{-12} \text{ F} = 2.50 \times 10^{-10} \text{ F}.

The RC time constant therefore is

R C  =  (1.0×105) (2.50×10−10)=2.50×10−5 s=25  μs.R\,C \;=\; (1.0 \times 10^5)\,(2.50 \times 10^{-10}) = 2.50 \times 10^{-5} \text{ s} = 25 \;\mu\text{s}.

Next we insert this value, together with m=0.60,m = 0.60, into the expression for fm(max⁡)f_{m(\max)}:

fm(max⁡)=12π R C m=12π (2.50×10−5) (0.60).f_{m(\max)} = \frac{1}{2\pi\,R\,C\,m} = \frac{1}{2\pi \,(2.50 \times 10^{-5})\,(0.60)}.

Combining the numbers step by step, we first multiply the denominator:

2π=6.2832,2\pi = 6.2832,

6.2832×0.60=3.76992,6.2832 \times 0.60 = 3.76992,

3.76992×2.50×10−5=9.4248×10−5 s.3.76992 \times 2.50 \times 10^{-5} = 9.4248 \times 10^{-5} \text{ s}.

Now we take the reciprocal to get the frequency:

fm(max⁡)=19.4248×10−5=1.0617×104 Hz.f_{m(\max)} = \frac{1}{9.4248 \times 10^{-5}} = 1.0617 \times 10^{4} \text{ Hz}.

Expressing this in kilohertz,

fm(max⁡)≈10.62 kHz.f_{m(\max)} \approx 10.62 \text{ kHz}.

Hence, the correct answer is Option D.

Tagged Modulation and demodulation. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicModulation and demodulation
TypeMultiple choice