A modulating signal is added to the carrier signal for amplitude modulation. The combined signal is passed through a non-linear square law device. The output is then passed through a band pass filter. The bandwidth of the output signal of band pass filter will be _____ MHz.
We have a modulating signal and a carrier signal . The modulating frequency is Hz MHz. The carrier frequency is Hz MHz.
The combined signal is . When this passes through a non-linear square law device, the output contains terms proportional to and . Expanding , we note that the cross-term produces frequencies at and , which are the upper and lower sidebands of the AM signal. The terms and produce low-frequency and high-frequency components (at , DC, and ) that lie outside the carrier band.
Now, the band pass filter is centred at the carrier frequency . It allows through only the frequencies near , namely the carrier at MHz, the upper sideband at MHz, and the lower sideband at MHz. All other frequency components are rejected.
The bandwidth of the output signal is the difference between the highest and lowest frequencies passed:
Hence, the correct answer is 2.
Tagged Modulation and demodulation. Machine-assigned, so read it as a strong shortlist rather than a verdict.