We start by translating the words of the question into the symbols used in amplitude-modulation theory. The unmodulated carrier has a peak (maximum) voltage Vc=15 V and an angular frequency ωc=2πfc with fc=11.21 MHz. The modulating (message) signal is a sinusoid whose peak voltage is Vm=5 V and whose frequency is fm=7.7 kHz.
In ordinary (double-side-band) amplitude modulation the time-domain equation for the modulated voltage is written first. The standard formula is
v(t)=Vc[1+msin(ωmt)]sin(ωct),
where the dimensionless quantity m is called the modulation index or modulation depth. Its definition is
m=VcVm.
Substituting the given numerical values, we have
m=VcVm=15 V5 V=31.
Next we want to isolate the upper and lower sideband terms. To do this we expand the product in the time-domain expression. First we note the trigonometric identity
sinAsinB=21[cos(A−B)−cos(A+B)].
Applying this identity to [msin(ωmt)]sin(ωct) gives
msin(ωmt)sin(ωct)=2m[cos((ωc−ωm)t)−cos((ωc+ωm)t)].
Hence the complete expansion of the modulated signal becomes
v(t)=Vcsin(ωct)+Vc[2mcos((ωc−ωm)t)−2mcos((ωc+ωm)t)]=Vcsin(ωct)+2mVccos((ωc−ωm)t)−2mVccos((ωc+ωm)t).
We see three distinct sinusoidal terms:
- Vcsin(ωct) is the carrier itself, still having peak amplitude Vc=15 V.
- 2mVccos((ωc−ωm)t) is the lower sideband (LSB) at frequency fc−fm.
- −2mVccos((ωc+ωm)t) is the upper sideband (USB) at frequency fc+fm. The minus sign only changes phase, not amplitude, so its peak amplitude is the same magnitude.
The important point is that each sideband has a peak voltage of
VSB=2mVc.
Substituting m=31 and Vc=15 V, we obtain
VSB=21(31)(15 V)=21×5 V=2.5 V.
The question states that the upper sideband amplitude is expressed as 10a V and the lower sideband amplitude as 10b V. Since both sidebands are equal in a normal AM wave, we identify
10a=2.5⟹a=25,
and also
10b=2.5⟹b=25.
The ratio sought is therefore
ba=2525=1.
So, the answer is 1.