RankRizz
JEE MAIN 2016 · 10 APR ONLINE+4 / −1MEDIUMTRANSCRIBED

JEE Main 2016 Physics question — Vertical circular motion

Concrete mixture is made by mixing cement, stone and sand in a rotating cylindrical drum. If the drum rotates too fast, the ingredients remain stuck to the wall of the drum and proper mixing of ingredients does not take place. The maximum rotational speed of the drum in revolutions per minute (rpm) to ensure proper mixing is close to:
(Take the radius of the drum to be 1.25 m and its axle to be horizontal):

SOLUTION

To solve this problem, we need to find the maximum rotational speed of a cylindrical drum in revolutions per minute (rpm) that ensures proper mixing of cement, stone, and sand. The drum has a radius of 1.25 m and rotates horizontally. If the drum rotates too fast, the ingredients stick to the wall due to centrifugal force, preventing proper mixing. The key is to determine the speed at which the ingredients just begin to lose contact with the wall at the highest point of rotation, allowing them to fall and mix.

Consider a small particle of the mixture stuck to the inner wall of the drum. When the drum rotates, this particle experiences two main forces: gravitational force pulling it downward and centrifugal force pushing it outward against the wall. At the highest point of rotation, the gravitational force acts toward the center of the drum, while the centrifugal force acts outward. For the particle to lose contact with the wall and fall (enabling mixing), the centrifugal force must exactly balance the gravitational force. At this point, the normal force exerted by the wall on the particle becomes zero.

The gravitational force is given by mgmg, where mm is the mass of the particle and gg is the acceleration due to gravity (approximately 9.8 m/s29.8 \, \text{m/s}^2). The centrifugal force is mω2rm \omega^2 r, where ω\omega is the angular velocity in radians per second and rr is the radius of the drum (1.25 m). At the highest point, setting these equal gives:

mg=mω2rmg = m \omega^2 r

We can divide both sides by mm (since mass is not zero) to simplify:

g=ω2rg = \omega^2 r

Solving for ω2\omega^2:

ω2=gr\omega^2 = \frac{g}{r}

Taking the square root of both sides to find ω\omega:

ω=gr\omega = \sqrt{\frac{g}{r}}

Substituting the known values g=9.8 m/s2g = 9.8 \, \text{m/s}^2 and r=1.25 mr = 1.25 \, \text{m}:

ω=9.81.25\omega = \sqrt{\frac{9.8}{1.25}}

First, compute the fraction inside the square root:

9.81.25=9.8×1001.25×100=980125\frac{9.8}{1.25} = \frac{9.8 \times 100}{1.25 \times 100} = \frac{980}{125}

Simplify 980125\frac{980}{125} by dividing numerator and denominator by 5:

980÷5125÷5=19625=7.84\frac{980 \div 5}{125 \div 5} = \frac{196}{25} = 7.84

So:

ω=7.84\omega = \sqrt{7.84}

Since 2.8×2.8=7.842.8 \times 2.8 = 7.84, we have:

ω=2.8 rad/s\omega = 2.8 \, \text{rad/s}

Now, convert angular velocity from radians per second to revolutions per minute (rpm). One revolution corresponds to 2π2\pi radians. First, find the rotational frequency in revolutions per second (rps):

f=ω2πf = \frac{\omega}{2\pi}

Substituting ω=2.8 rad/s\omega = 2.8 \, \text{rad/s} and π≈3.1416\pi \approx 3.1416:

f=2.82×3.1416=2.86.2832≈0.4456 rpsf = \frac{2.8}{2 \times 3.1416} = \frac{2.8}{6.2832} \approx 0.4456 \, \text{rps}

To convert rps to rpm, multiply by 60 (since there are 60 seconds in a minute):

rpm=0.4456×60=26.736\text{rpm} = 0.4456 \times 60 = 26.736

Rounding 26.736 to the nearest tenth gives approximately 26.7 rpm, which is closest to 27.0 rpm among the given options.

Alternatively, using exact fractions for verification:

ω=9.81.25=98/10125/100=9810×100125=98×10125=980125=19625=145=2.8 rad/s\omega = \sqrt{\frac{9.8}{1.25}} = \sqrt{\frac{98/10}{125/100}} = \sqrt{\frac{98}{10} \times \frac{100}{125}} = \sqrt{\frac{98 \times 10}{125}} = \sqrt{\frac{980}{125}} = \sqrt{\frac{196}{25}} = \frac{14}{5} = 2.8 \, \text{rad/s}

Then:

f=2.82π=75π rpsf = \frac{2.8}{2\pi} = \frac{7}{5\pi} \, \text{rps}

Convert to rpm:

rpm=75π×60=7×605π=4205π=84π\text{rpm} = \frac{7}{5\pi} \times 60 = \frac{7 \times 60}{5\pi} = \frac{420}{5\pi} = \frac{84}{\pi}

Using π≈3.1416\pi \approx 3.1416:

843.1416≈26.75\frac{84}{3.1416} \approx 26.75

Which rounds to 27.0 rpm.

This speed is the maximum because if the drum rotates faster, ω\omega increases, making centrifugal force greater than gravity. This causes the ingredients to stick to the wall, preventing mixing. At or below 27.0 rpm, ingredients will fall and mix properly.

Hence, the correct answer is Option A.

Tagged Vertical circular motion. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicVertical circular motion
TypeMultiple choice