RankRizz
JEE MAIN 2021 · 26 AUG S1+4 / −1MEDIUMTRANSCRIBED

JEE Main 2021 Physics question — RC circuits: charging and discharging

The material filled between the plates of a parallel plate capacitor has resistivity 200 Ω\Omega m. The value of capacitance of the capacitor is 2 pF. If a potential difference of 40 V is applied across the plates of the capacitor, then the value of leakage current flowing out of the capacitor is: (given the value of relative permittivity of material is 50)

SOLUTION

For a parallel-plate capacitor we first recall the fundamental relation for its capacitance.

Formula: C=εrε0AdC=\varepsilon_r\varepsilon_0\frac{A}{d} where εr\varepsilon_r is the relative permittivity, ε0=8.854×10−12 F m−1\varepsilon_0=8.854\times10^{-12}\,\text{F\,m}^{-1} is the permittivity of free space, AA is the plate area and dd is the separation.

Re-arranging, the geometry factor becomes

Ad=Cεrε0\frac{A}{d}=\frac{C}{\varepsilon_r\varepsilon_0}.

Now we write the electrical resistance offered by the same slab of dielectric. For a material of resistivity ρ\rho placed between parallel plates,

Formula: R=ρdAR=\rho\frac{d}{A}.

We can eliminate the unknown geometry by substituting d/Ad/A from the reciprocal of the earlier expression:

R=ρdA=ρ(1A/d)=ρ(1C/(εrε0))=ρεrε0 1C.R=\rho\frac{d}{A}=\rho\left(\frac{1}{A/d}\right)=\rho\left(\frac{1}{C/(\varepsilon_r\varepsilon_0)}\right)=\rho\varepsilon_r\varepsilon_0\,\frac{1}{C}.

Substituting the numerical values ρ=200 Ω m,  εr=50,  C=2  pF=2×10−12 F\rho=200\,\Omega\text{ m},\; \varepsilon_r=50,\; C=2\;\text{pF}=2\times10^{-12}\,\text{F}, we get

R=200×50×8.854×10−12 12×10−12R=200\times50\times8.854\times10^{-12}\,\frac{1}{2\times10^{-12}}   =10000×8.854×10−12 12×10−12\;=10000\times8.854\times10^{-12}\,\frac{1}{2\times10^{-12}}   =8.854×10−8 12×10−12\;=8.854\times10^{-8}\,\frac{1}{2\times10^{-12}}   =8.8542×10(−8)−(−12)\;=\frac{8.854}{2}\times10^{(-8)-(-12)}   =4.427×104  Ω\;=4.427\times10^{4}\;\Omega   =4.427×104  Ω  (about 44.3  kΩ).\;=4.427\times10^{4}\;\Omega \;(\text{about }44.3\;\text{k}\Omega).

The leakage current is obtained from Ohm’s law I=VRI=\dfrac{V}{R}, with the applied potential difference V=40  VV=40\;\text{V}:

I=404.427×104  AI=\frac{40}{4.427\times10^{4}}\;\text{A}   =0.904×10−3  A\;=0.904\times10^{-3}\;\text{A}   =9.04×10−4  A\;=9.04\times10^{-4}\;\text{A}   =0.9  mA  (approximately).\;=0.9\;\text{mA}\;(\text{approximately}).

Hence, the correct answer is Option A.

Tagged RC circuits: charging and discharging. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicRC circuits: charging and discharging
TypeMultiple choice