We are told that the applied alternating emf is e=e0sin(100t), where the time t is in seconds.
Comparing e=e0sin(ωt) with the standard form e=e0sin(ωt), we recognise that the angular frequency is
ω=100 rad s−1.
The circuit to be chosen must give a phase difference of
ϕ=4π=45∘
between the applied emf e and the current i. We therefore examine how the phase angle arises in series RC and RL circuits.
For a series RC circuit the impedance is
Z=R−jXC=R−jωC1,
so the phase of the impedance (with respect to the real axis) is
θ=−tan−1(RXC)=−tan−1(ωRC1).
Because the current leads the voltage by the magnitude of this angle, the current-voltage phase difference is
ϕRC=tan−1(ωRC1).
For a series RL circuit the impedance is
Z=R+jXL=R+jωL,
so the phase of the impedance is
θ=tan−1(RXL)=tan−1(RωL).
This time the current lags the voltage by the same magnitude, giving
ϕRL=tan−1(RωL).
In both cases we require the magnitude of the phase angle to be
ϕ=4π,
which implies
tanϕ=1.
We now check each option.
Option A: RC circuit, R=1 kΩ=103 Ω, C=1 μF=10−6 F.
Using tanϕ=ωRC1, we have
tanϕA=(100)(103)(10−6)1=0.11=10.
Since tanϕA=10=1, the phase angle is not π/4. This option is rejected.
Option B: RL circuit, R=1 kΩ=103 Ω, L=1 mH=10−3 H.
Using tanϕ=RωL, we have
tanϕB=103(100)(10−3)=1030.1=1×10−4.
Since tanϕB=1, the required phase difference is not obtained. This option is rejected.
Option C: RL circuit, R=1 kΩ=103 Ω, L=10 mH=10−2 H.
Again using tanϕ=RωL,
tanϕC=103(100)(10−2)=1031=0.001.
This is still far from unity, so the phase angle is not π/4. This option is also rejected.
Option D: RC circuit, R=1 kΩ=103 Ω, C=10 μF=10−5 F.
Using tanϕ=ωRC1, we get
tanϕD=(100)(103)(10−5)1=11=1.
Because tanϕD=1, we have
ϕD=tan−1(1)=45∘=4π.
This is exactly the required phase difference. Therefore option D satisfies the given condition.
Hence, the correct answer is Option D.