For an RLC circuit driven with voltage of amplitude and frequency , the current exhibits resonance. The quality factor, Q is given by:
We begin with the standard series RLC circuit, in which the resistor , inductor and capacitor are connected in series and are driven by a sinusoidal voltage source of angular frequency and peak (amplitude) value .
For any series RLC circuit the total impedance is written as
where the symbol represents the imaginary unit . The magnitude of this impedance is therefore
Resonance in a series circuit occurs at that frequency at which the net reactance vanishes, i.e.
Solving this equation for the resonant angular frequency, we get
At resonance the impedance magnitude reduces to its purely resistive part, namely , and hence the current amplitude becomes maximum, signifying the phenomenon of current resonance.
Now we introduce the quality factor, denoted by . For a series resonant circuit, the definition used in most elementary courses is
An alternative and very convenient expression—derived from that definition and widely quoted—is
We will show why this result holds. In an inductor the peak magnetic energy stored equals
while in a capacitor the peak electric energy stored is
Because the inductor and capacitor exchange energy sinusoidally with each other, the total maximum energy stored in the reactive elements at resonance can be represented (for one half-cycle) by either of the above forms; customarily we use the inductive one, yielding
The average power dissipated in the resistor over a complete cycle is
and for a sinusoidal current the relation between peak and rms values is , so that
The energy dissipated per cycle is therefore
where is the period at resonance. Substituting, we obtain
Using the definition we write
The current and its amplitude cancel out, leaving a remarkably simple relationship that ties together the three element parameters. This final algebraic form,
is exactly the same as Option B in the list given.
None of the other options reproduces the factor in the numerator with in the denominator, so they are incorrect for a series RLC circuit at resonance.
Hence, the correct answer is Option B.
Tagged Resonance, bandwidth and quality factor. Machine-assigned, so read it as a strong shortlist rather than a verdict.