RankRizz
JEE MAIN 2021 · 31 AUG S2+4MEDIUMTRANSCRIBED

JEE Main 2021 Physics question — Series LCR circuits: impedance and phase

At very high frequencies, the effective impedance of the given circuit will be _________ Ω\Omega.

Figure for JEE Main 2021 Physics question on Series LCR circuits: impedance and phase
SOLUTION

Based on the provided images, here is the formatted, step-by-step solution to the problem.

Problem Statement

At very high frequencies, find the effective impedance of the given AC circuit.

Step-by-Step Solution

To find the effective impedance at very high frequencies (f→∞f \to \infty), we need to evaluate how the reactive components (inductors and capacitors) behave.

1. Behavior of Capacitors at High Frequency

The capacitive reactance (XCX_C) is given by the formula:

XC=12πfCX_C = \frac{1}{2\pi f C}

  • As frequency (ff) becomes very large, XCX_C approaches zero (XC→0X_C \to 0).
  • Therefore, all capacitors act as a short circuit (ideal wires).
  • As frequency (ff) becomes very large, XLX_L approaches infinity (XL→∞X_L \to \infty).
  • Therefore, the inductor acts as an open circuit (broken wire/infinite resistance).
  • Replace all capacitors (0.5 F0.5\text{ F}) with simple connecting wires.
  • Replace the branch containing the inductor (20 H20\text{ H}) with an open break. Because this bottom-left branch is broken, no current flows through the 1 Ω1\ \Omega resistor connected in series with the inductor.
  • A single 1 Ω1\ \Omega resistor in the top-left branch.
  • Followed by a parallel combination of two 2 Ω2\ \Omega resistors on the right.
  • Parallel Combination:
  • Total Impedance:

2. Behavior of Inductors at High Frequency

The inductive reactance (XLX_L) is given by the formula:

XL=2πfLX_L = 2\pi f L

Simplified Circuit Analysis

Applying these conditions to the original network:

This leaves us with the following simplified equivalent circuit:

Calculating Equivalent Impedance (ZeqZ_{\text{eq}})

The two 2 Ω2\ \Omega resistors are in parallel. Their equivalent resistance (RpR_p) is:

Rp=2×22+2=1 ΩR_p = \frac{2 \times 2}{2 + 2} = 1\ \Omega

This combination is in series with the remaining 1 Ω1\ \Omega resistor:

Zeq=1 Ω+Rp=1+1=2 ΩZ_{\text{eq}} = 1\ \Omega + R_p = 1 + 1 = 2\ \Omega

Final Answer

The effective impedance of the given circuit at very high frequencies is 22 Ω\Omega.

Tagged Series LCR circuits: impedance and phase. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicSeries LCR circuits: impedance and phase
TypeNumerical answer