JEE Main 2020 Physics question — Series LCR circuits: impedance and phase
A 750 Hz, 20 V(rms) source is connected to a resistance of 100 Ω, an inductance of 0.1803 H and a capacitance of 10 μF all in series. The time in which the resistance (heat capacity 2 J/°C) will get heated by 10°C (assume no loss of heat to the surroundings) is close to:
SOLUTION
The source has frequency f=750 Hz and rms voltage Vrms=20 V.
First we convert frequency to angular frequency using the relation ω=2πf. Hence
ω=2π×750rad s−1=1500πrad s−1≈4712rad s−1.
For the series combination we need the reactances. The inductive reactance is defined by the formula XL=ωL. Substituting L=0.1803H,
XL=4712×0.1803Ω≈849.6Ω.
The capacitive reactance is given by XC=ωC1. With C=10μF=10×10−6F,
XC=4712×10×10−61Ω=0.04712391Ω≈21.23Ω.
The net reactance of the series circuit is therefore
X=XL−XC=849.6Ω−21.23Ω≈828.4Ω.
The magnitude of the total impedance of a series RLC circuit is obtained from the relation
Z=R2+X2.
Putting R=100Ω and X=828.4Ω,
Z=(100)2+(828.4)2=10000+686263=696263≈834.5Ω.
The rms current in the circuit is given by Ohm’s law Irms=ZVrms. Using Vrms=20V,
Irms=834.520A≈2.396×10−2A
or Irms≈0.02396A.
The power actually dissipated (converted to heat) is only that in the resistor. The average power in the resistor is
P=Irms2R.
Substituting,
P=(0.02396)2×100W=0.000574×100W≈0.0574W.
The resistor has a heat capacity of 2J/∘C. The energy needed to raise its temperature by ΔT=10∘C is
Q=(heat capacity)×ΔT=2×10J=20J.
If the whole of the electrical power goes into heating (no losses to the surroundings are assumed), the time required is
t=PQ=0.0574W20J≈3.47×102s≈347s.
Rounded to the nearest whole second this is about 348s.
Hence, the correct answer is Option D.
Tagged Series LCR circuits: impedance and phase. Machine-assigned, so read it as a strong shortlist rather than a verdict.