RankRizz
JEE MAIN 2021 · 25 JUL S2+4 / −1MEDIUMTRANSCRIBED

JEE Main 2021 Physics question — Series LCR circuits: impedance and phase

A 10 Ω\Omega resistance is connected across 220 V - 50 Hz AC supply. The time taken by the current to change from its maximum value to the rms value is:

SOLUTION

For a purely resistive circuit the alternating current has the same waveform as the alternating voltage, only scaled by the resistance. Thus, if the instantaneous voltage is written as

v(t)=Vmsin⁡(ωt),v(t)=V_{\text m}\sin(\omega t),

then the instantaneous current is

i(t)=v(t)R=Imsin⁡(ωt),where Im=VmR.i(t)=\dfrac{v(t)}{R}=I_{\text m}\sin(\omega t),\qquad\text{where }I_{\text m}= \dfrac{V_{\text m}}{R}.

First we express the maximum (peak) and rms values.

Formula: Vm=2 Vrms,Irms=Im2.V_{\text m}=\sqrt{2}\,V_{\text{rms}},\qquad I_{\text{rms}}=\dfrac{I_{\text m}}{\sqrt{2}}.

The supply gives Vrms=220 V,V_{\text{rms}}=220\ \text V, so

Vm=2×220 V=2202 V.V_{\text m}=\sqrt{2}\times220\ \text V=220\sqrt{2}\ \text V.

With the resistance R=10 ΩR=10\ \Omega we have

Im=VmR=220210=222 A,I_{\text m}=\dfrac{V_{\text m}}{R}=\dfrac{220\sqrt{2}}{10}=22\sqrt{2}\ \text A,

and correspondingly

Irms=Im2=22 A.I_{\text{rms}}=\dfrac{I_{\text m}}{\sqrt{2}}=22\ \text A.

Now we look at how the current changes with time. We write

i(t)=Imsin⁡(ωt).i(t)=I_{\text m}\sin(\omega t).

The maximum value occurs when sin⁡(ωt)=1.\sin(\omega t)=1. The smallest positive angle giving this is ωt=π2,\omega t=\dfrac{\pi}{2}, so the time at that instant is

t1=π/2ω.t_1=\dfrac{\pi/2}{\omega}.

Next we want the time when the current has fallen to its rms value. We set

i(t2)=Irms=Im2.i(t_2)=I_{\text{rms}}=\dfrac{I_{\text m}}{\sqrt{2}}.

Substituting into the waveform,

Imsin⁡(ωt2)=Im2  ⟹  sin⁡(ωt2)=12.I_{\text m}\sin(\omega t_2)=\dfrac{I_{\text m}}{\sqrt{2}} \;\Longrightarrow\; \sin(\omega t_2)=\dfrac{1}{\sqrt{2}}.

The principal angles whose sine equals 1/21/\sqrt{2} are ωt2=π4 or 3π4.\omega t_2=\dfrac{\pi}{4}\ \text{or}\ \dfrac{3\pi}{4}.

Since the current is decreasing after reaching its maximum at ωt=π/2\omega t=\pi/2, we select the later angle

ωt2=3π4.\omega t_2=\dfrac{3\pi}{4}.

The angular frequency is determined by the supply frequency

Formula: ω=2πf.\omega = 2\pi f.

With f=50 Hz,f = 50\ \text{Hz},

ω=2π×50=100π rad s−1.\omega = 2\pi \times 50 = 100\pi\ \text{rad s}^{-1}.

Hence,

t1=π/2100π=1200 s=0.005 s,t_1=\dfrac{\pi/2}{100\pi}=\dfrac{1}{200}\ \text s=0.005\ \text s,

t2=3π/4100π=3400 s=0.0075 s.t_2=\dfrac{3\pi/4}{100\pi}=\dfrac{3}{400}\ \text s=0.0075\ \text s.

The required time interval for the current to drop from its maximum to its rms value is

Δt=t2−t1=(3400−2400)s=1400 s=0.0025 s.\Delta t = t_2 - t_1 = \left(\dfrac{3}{400}-\dfrac{2}{400}\right)\text s=\dfrac{1}{400}\ \text s=0.0025\ \text s.

Converting to milliseconds,

Δt=0.0025 s=2.5 ms.\Delta t = 0.0025\ \text s = 2.5\ \text{ms}.

Hence, the correct answer is Option A.

Tagged Series LCR circuits: impedance and phase. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicSeries LCR circuits: impedance and phase
TypeMultiple choice