RankRizz
JEE MAIN 2013 · 25 APR ONLINE+4 / −1EASYTRANSCRIBED

JEE Main 2013 Physics question — Series LCR circuits: impedance and phase

When resonance is produced in a series LCR circuit, then which of the following is not correct?

SOLUTION

In a series LCR circuit, resonance occurs when the inductive reactance XLX_L equals the capacitive reactance XCX_C. At this frequency, the circuit behaves purely resistively. Let's evaluate each option step by step.

Option A states that the current in the circuit is in phase with the applied voltage. At resonance, the phase angle ϕ\phi is given by ϕ=tan⁡−1(XL−XCR)\phi = \tan^{-1}\left(\frac{X_L - X_C}{R}\right). Since XL=XCX_L = X_C, ϕ=0\phi = 0, meaning the current and voltage are in phase. Thus, option A is correct.

Option B states that inductive and capacitive reactances are equal. This is the defining condition for resonance in a series LCR circuit, so XL=XCX_L = X_C. Therefore, option B is correct.

Option C states that if resistance RR is reduced, the voltage across the capacitor will increase. At resonance, the impedance Z=RZ = R (minimum), so the current amplitude I0=V0RI_0 = \frac{V_0}{R}, where V0V_0 is the peak applied voltage. The voltage across the capacitor is VC=I⋅XCV_C = I \cdot X_C. Substituting, VC=(V0R)⋅XCV_C = \left(\frac{V_0}{R}\right) \cdot X_C. Since XC=1ωCX_C = \frac{1}{\omega C} remains constant at the same resonant frequency, VCV_C is inversely proportional to RR. If RR decreases, VCV_C increases. Thus, option C is correct.

Option D states that the impedance of the circuit is maximum. The impedance in a series LCR circuit is Z=R2+(XL−XC)2Z = \sqrt{R^2 + (X_L - X_C)^2}. At resonance, XL=XCX_L = X_C, so Z=R2+0=RZ = \sqrt{R^2 + 0} = R. This is the minimum possible impedance, not the maximum. Therefore, option D is not correct.

Hence, the correct answer is Option D.

Tagged Series LCR circuits: impedance and phase. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicSeries LCR circuits: impedance and phase
TypeMultiple choice