RankRizz
JEE MAIN 2019 · 10 JAN S1+4 / −1EASYTRANSCRIBED

JEE Main 2019 Chemistry question — Alkaline earth metals: properties and trends

The metal used for making X-ray tube window is:

SOLUTION

In an X-ray tube, electrons strike a metal target and produce X-rays, which then have to pass out of the evacuated tube through a thin “window.” The window material must satisfy two crucial conditions: it must be mechanically strong enough to withstand the pressure difference, and it must absorb the least possible fraction of the emerging X-ray beam so that intensity losses are minimal.

To analyse the absorption of X-rays by a material, we recall the exponential attenuation law, stated as

I  =  I0 e−μx,I \;=\; I_0 \, e^{-\mu x},

where I0I_0 is the incident intensity, II is the transmitted intensity after passing through a thickness x,x, and μ\mu is the linear absorption coefficient of the material. A smaller μ\mu means smaller attenuation for the same thickness, hence a better window material.

Now, the absorption coefficient μ\mu depends strongly on the atomic number ZZ of the material; in general, μ\mu increases rapidly with increasing ZZ because heavier nuclei interact more strongly with X-rays. Therefore, to minimise absorption, we want a metal with the lowest possible atomic number among those that are mechanically suitable.

Let us list the atomic numbers:

Mg: Z=12,Na: Z=11,Be: Z=4,Ca: Z=20.\text{Mg: } Z = 12,\quad \text{Na: } Z = 11,\quad \text{Be: } Z = 4,\quad \text{Ca: } Z = 20.

Clearly, beryllium (Z=4Z = 4) has by far the lowest atomic number of the four. Owing to this low Z,Z, its absorption coefficient μ\mu is correspondingly small, and the factor e−μxe^{-\mu x} remains close to unity even for practical window thicknesses. Thus, beryllium allows most of the generated X-ray photons to exit the tube with minimal loss while still providing adequate mechanical strength because of its high stiffness-to-weight ratio.

All other listed metals (magnesium, sodium, calcium) have higher atomic numbers, resulting in significantly greater absorption of X-rays and therefore are not preferred for the window.

So, the only metal that meets the requirement of very low X-ray absorption while retaining mechanical integrity is beryllium.

Hence, the correct answer is Option C.

Tagged Alkaline earth metals: properties and trends. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectChemistry
TopicAlkaline earth metals: properties and trends
TypeMultiple choice