Compounds that should not be used as primary standards in titrimetric analysis are:
A.
B. Oxalic acid
C. NaOH
D.
E. Sodium tetraborate
Choose the most appropriate answer from the options given below:
In titrimetric (volumetric) analysis a primary standard is the substance that is weighed accurately, dissolved, and its solution is used to standardise another reagent. For a compound to serve as a primary standard it must satisfy all the conditions below:
• Very high purity and known formula
• Stable in air (non-hygroscopic, non-deliquescent, does not react with or )
• Reasonably high molar/equivalent mass (reduces weighing error)
• Soluble in the chosen solvent and gives a stoichiometric reaction
• Non-toxic and easily available
Let us test each compound given in the question against the above requirements.
Case A:
(sodium dichromate)
This salt is strongly hygroscopic and absorbs moisture from air, so its weighed mass does not give a fixed number of moles. Hence it fails the “stable in air” criterion and should not be used as a primary standard.
Case B:
Oxalic acid, generally used as the dihydrate , is available in high purity, has a fixed water of crystallisation, is not hygroscopic, and has a suitable equivalent mass. Therefore it is a good primary standard and is widely used for standardising .
Case C:
NaOH (sodium hydroxide) readily absorbs both (moisture) and from the atmosphere, forming . Because of this, its composition changes while weighing. Thus NaOH cannot be used as a primary standard.
Case D:
(ferrous sulphate hexahydrate) slowly oxidises to in air and also effloresces (loses water). Hence its exact formula weight changes with time. It is therefore unsuitable as a primary standard.
Case E:
Sodium tetraborate (borax), , is available in very pure form, is not appreciably hygroscopic, and has a high equivalent mass. Because it meets all the criteria, it is an excellent primary standard for acid-base titrations.
Summarising the suitability:
• Not suitable A (), C (NaOH), D ()
• Suitable B (oxalic acid), E (sodium tetraborate)
The compounds that should NOT be used as primary standards are therefore A, C and D only.
Option D is correct.
Tagged Titrimetric exercises. Machine-assigned, so read it as a strong shortlist rather than a verdict.