RankRizz
JEE MAIN 2018 · 15 APR S2+4 / −1EASYTRANSCRIBED

JEE Main 2018 Chemistry question — pH of acids, bases and their mixtures

Following four solutions are prepared by mixing different volumes of NaOH and HCl of different concentrations, pH of which one of them will be equal to 1?

SOLUTION

We recall that pH is defined by the formula pH=−log⁡10[H+]\text{pH}= -\log_{10}[H^+] where [H+][H^+] is the molar concentration of hydrogen ions in the final solution. For a strong acid-strong base mixture, the steps are: (i) calculate the initial moles of HClHCl and NaOHNaOH, (ii) subtract to find the excess moles of the stronger component, (iii) divide by the total final volume to get [H+][H^+] (or [OH−][OH^-]), and (iv) use the definition of pH. We perform these steps for every option one by one.

Option A gives 55 mL of M10\dfrac{M}{10} HCl and 45 mL of M10\dfrac{M}{10} NaOH. First convert volumes into litres:

VHCl=55 mL=0.055 L,VNaOH=45 mL=0.045 LV_{\text{HCl}} = 55\text{ mL}=0.055\text{ L}, \quad V_{\text{NaOH}} = 45\text{ mL}=0.045\text{ L}

The molarity M10\dfrac{M}{10} equals 0.1 M0.1\text{ M}. Using moles=M×V\text{moles}=M\times V,

nHCl=0.1×0.055=0.0055n_{\text{HCl}} = 0.1 \times 0.055 = 0.0055

nNaOH=0.1×0.045=0.0045n_{\text{NaOH}} = 0.1 \times 0.045 = 0.0045

Excess moles of acid:

nH+(excess)=0.0055−0.0045=0.0010n_{H^+(\text{excess})}=0.0055-0.0045=0.0010

Total volume after mixing:

Vtotal=0.055+0.045=0.100 LV_{\text{total}} = 0.055+0.045 = 0.100\text{ L}

Hydrogen-ion concentration:

[H+]=0.00100.100=0.010 M[H^+]=\dfrac{0.0010}{0.100}=0.010\text{ M}

pH obtained:

pH=−log⁡10(0.010)=2\text{pH} = -\log_{10}(0.010)=2

We need pH 1, so Option A is not suitable.

Option B offers 75 mL of M5\dfrac{M}{5} HCl and 25 mL of M5\dfrac{M}{5} NaOH. Here M5=0.2 M\dfrac{M}{5}=0.2\text{ M}. Converting volumes:

VHCl=75 mL=0.075 L,VNaOH=25 mL=0.025 LV_{\text{HCl}} = 75\text{ mL}=0.075\text{ L}, \quad V_{\text{NaOH}} = 25\text{ mL}=0.025\text{ L}

Moles present:

nHCl=0.2×0.075=0.015n_{\text{HCl}} = 0.2 \times 0.075 = 0.015

nNaOH=0.2×0.025=0.005n_{\text{NaOH}} = 0.2 \times 0.025 = 0.005

Excess acid moles:

nH+(excess)=0.015−0.005=0.010n_{H^+(\text{excess})}=0.015-0.005 = 0.010

Total volume after mixing:

Vtotal=0.075+0.025=0.100 LV_{\text{total}} = 0.075+0.025 = 0.100\text{ L}

Therefore the hydrogen-ion concentration is

[H+]=0.0100.100=0.10 M[H^+]=\dfrac{0.010}{0.100}=0.10\text{ M}

Using the pH definition:

pH=−log⁡10(0.10)=1\text{pH} = -\log_{10}(0.10)=1

This mixture indeed gives pH 1.

Option C mixes 100 mL of M10\dfrac{M}{10} HCl with 100 mL of M10\dfrac{M}{10} NaOH. For each, M=0.1 MM=0.1\text{ M} and V=0.100 LV=0.100\text{ L}, thus

nHCl=0.1×0.100=0.010,nNaOH=0.010n_{\text{HCl}} = 0.1 \times 0.100 = 0.010, \quad n_{\text{NaOH}} = 0.010

Both moles are equal, so complete neutralisation occurs, leaving no excess H+H^+ or OH−OH^-:

[H+]=10−7 M (pure water),pH=7[H^+]=10^{-7}\text{ M (pure water)}, \quad \text{pH}=7

Hence Option C does not satisfy the requirement.

Option D supplies 60 mL of M10\dfrac{M}{10} HCl and 40 mL of M10\dfrac{M}{10} NaOH. Converting:

VHCl=0.060 L,VNaOH=0.040 L,M=0.1 MV_{\text{HCl}} = 0.060\text{ L}, \quad V_{\text{NaOH}} = 0.040\text{ L}, \quad M = 0.1\text{ M}

Moles:

nHCl=0.1×0.060=0.006n_{\text{HCl}} = 0.1 \times 0.060 = 0.006

nNaOH=0.1×0.040=0.004n_{\text{NaOH}} = 0.1 \times 0.040 = 0.004

Excess acid moles:

nH+(excess)=0.006−0.004=0.002n_{H^+(\text{excess})}=0.006-0.004=0.002

Total volume:

Vtotal=0.060+0.040=0.100 LV_{\text{total}} = 0.060+0.040=0.100\text{ L}

Hydrogen-ion concentration:

[H+]=0.0020.100=0.020 M[H^+]=\dfrac{0.002}{0.100}=0.020\text{ M}

pH value:

pH=−log⁡10(0.020)≈1.70\text{pH}=-\log_{10}(0.020)\approx 1.70

So Option D is also unsuitable.

Only Option B yields the required pH of 1.

Hence, the correct answer is Option B.

Tagged pH of acids, bases and their mixtures. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectChemistry
TopicpH of acids, bases and their mixtures
TypeMultiple choice