RankRizz
JEE ADVANCED 2022 · PAPER 2+3 / −1MEDIUMTRANSCRIBED

JEE Advanced 2022 Physics question — Screw gauge: pitch, least count and zero error

Area of the cross-section of a wire is measured using a screw gauge. The pitch of the main scale is 0.5 mm. The circular scale has 100 divisions and for one full rotation of the circular scale, the main scale shifts by two divisions. The measured readings are listed below.

Measurement conditionMain scale readingCircular scale reading
Two arms of gauge touching each other without wire0 division4 division
Attempt-1: With wire4 divisions20 divisions
Attempt-2: With wire4 divisions16 divisions

What are the diameter and cross-sectional area of the wire measured using the screw gauge?

SOLUTION

The distance between successive main-scale divisions is given as 0.5 mm0.5\text{ mm}.
For one complete rotation of the circular scale the sleeve advances by two such divisions, so the pitch (advance per rotation) is

Pitch=2×0.5 mm=1.0 mm\text{Pitch}=2\times 0.5\text{ mm}=1.0\text{ mm}

The circular scale has 100100 equal divisions; therefore the least count (smallest readable length) is

Least count (LC)=PitchNo. of circular divisions=1.0 mm100=0.01 mm\text{Least count (LC)}=\frac{\text{Pitch}}{\text{No. of circular divisions}}=\frac{1.0\text{ mm}}{100}=0.01\text{ mm}

Zero reading (with jaws in contact)
Main-scale reading = 00 division   ( = 0 mm0\text{ mm} )
Circular-scale reading = 44 divisions

Observed length with no wire = 4×LC=4×0.01=0.04 mm4 \times \text{LC}=4\times 0.01=0.04\text{ mm}

Since the screw gauge reads 0.04 mm0.04\text{ mm} when the true separation is 00, it possesses a positive zero error of +0.04 mm+0.04\text{ mm}.
Hence the zero correction (to be applied to every reading) is

Zero correction=−0.04 mm\text{Zero correction}=-0.04\text{ mm}

Attempt 1 (with wire)
Main-scale reading = 44 divisions ⇒4×0.5=2.00 mm\Rightarrow 4\times 0.5 =2.00\text{ mm}
Circular-scale reading = 2020 divisions ⇒20×0.01=0.20 mm\Rightarrow 20\times 0.01 =0.20\text{ mm}

Observed diameter d1=2.00+0.20=2.20 mmd_1 = 2.00+0.20 = 2.20\text{ mm}
Corrected diameter d1′=2.20−0.04=2.16 mmd_1^{\prime}=2.20-0.04 = 2.16\text{ mm}

Attempt 2 (with wire)
Main-scale reading = 44 divisions ⇒2.00 mm\Rightarrow 2.00\text{ mm}
Circular-scale reading = 1616 divisions ⇒0.16 mm\Rightarrow 0.16\text{ mm}

Observed diameter d2=2.00+0.16=2.16 mmd_2 = 2.00+0.16 = 2.16\text{ mm}
Corrected diameter d2′=2.16−0.04=2.12 mmd_2^{\prime}=2.16-0.04 = 2.12\text{ mm}

Mean diameter

dˉ=d1′+d2′2=2.16+2.122=2.14 mm\bar d=\frac{d_1^{\prime}+d_2^{\prime}}{2}=\frac{2.16+2.12}{2}=2.14\text{ mm}

Uncertainty in diameter
The two corrected readings differ by 0.04 mm0.04\text{ mm}, so the spread about the mean is ±0.02 mm\pm 0.02\text{ mm}. Therefore

d=2.14±0.02 mmd = 2.14 \pm 0.02 \text{ mm}

Cross-sectional area
For a circular wire A=πd24A=\dfrac{\pi d^{2}}{4}.

A=π(2.14 mm)24=π×1.1449 mm2  ≈  π(1.14 mm2)A=\frac{\pi (2.14\text{ mm})^{2}}{4} =\pi \times 1.1449\text{ mm}^2 \;\approx\; \pi(1.14\text{ mm}^2)

Uncertainty in area
Fractional error: Δdd=0.022.14=0.00935\dfrac{\Delta d}{d}= \dfrac{0.02}{2.14}=0.00935.
Since A∝d2A\propto d^{2}, fractional error in area is twice this value:

ΔAA=2×0.00935=0.0187\frac{\Delta A}{A}=2\times 0.00935=0.0187

Absolute error: ΔA=0.0187×1.14 mm2≈0.02 mm2\Delta A = 0.0187 \times 1.14\text{ mm}^2 \approx 0.02\text{ mm}^2

Thus

A=π(1.14±0.02) mm2A = \pi\bigl(1.14 \pm 0.02\bigr)\text{ mm}^2

Therefore, the measured values are

Diameter = 2.14±0.02 mm2.14 \pm 0.02\text{ mm},   Area = π(1.14±0.02) mm2\pi(1.14 \pm 0.02)\text{ mm}^2

Hence the correct choice is
Option C which is: 2.14 ± 0.02 mm, π\pi(1.14 ± 0.02) mm2^2.

Tagged Screw gauge: pitch, least count and zero error. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicScrew gauge: pitch, least count and zero error
TypeMultiple choice