RankRizz
JEE ADVANCED 2015 · PAPER 1+4 / −2MEDIUMTRANSCRIBED

JEE Advanced 2015 Physics question — Vernier calipers: least count and zero error

Consider a Vernier callipers in which each 1 cm on the main scale is divided into 8 equal divisions and a screw gauge with 100 divisions on its circular scale. In the Vernier
callipers, 5 divisions of the Vernier scale coincide with 4 divisions on the main scale and in the screw gauge, one complete rotation of the circular scale movesit by two divisions on the linear scale. Then:

SOLUTION

In given Vernier callipers, each 1 cm is equally divided into 8 main scale divisions (MSD). Thus, 1 MSD = = 0.125 cm. Further, 4 main scale divisions coincide with 5 Vernier scale divisions (VSD) i.e., 4 MSD = 5 VSD. Thus, 1 VSD = 4/5 MSD = 0.8 0.125 = 0.1 cm. The least count of the Vernier callipers is given by

LC = 1 MSD 1 VSD = 0.125 0.1 = 0.025 cm.

In screw gauge, let l be the distance between two adjacent divisions on the linear scale. The pitch p of the screw gauge is the distance travelled on the linear scale when it makes one complete rotation. Since circular scale moves by two divisions on the linear scale when it makes one complete rotation, we get p = 2l. The least count of the screw gauge is defined as ratio of the pitch to the number of divisions on the circular scale (n) i.e.,

....... (1)

If p = 2 LC = 2(0.025) = 0.05 cm, then cm. Substitute l in equation (1) to get the least count of the screw gauge

cm = 0.005 mm.

If l = 2 LC = 2(0.025) = 0.05 cm then equation (1) gives

cm = 0.01 mm.

Tagged Vernier calipers: least count and zero error. Machine-assigned, so read it as a strong shortlist rather than a verdict.

SubjectPhysics
TopicVernier calipers: least count and zero error
TypeMultiple correct