The correct option(s) related to the extraction of iron from its ore in the blast furnace operating in the temperature range 900 - 1500 K is(are)
In a blast furnace the charge contains iron ore ( / ), coke () and limestone (). The principal reactions that occur between are summarised below, followed by the assessment of each option.
Reaction of limestone and removal of silica
(fusible slag)
Thus limestone supplies which combines with the acidic impurity to give calcium silicate slag.
Reactions involving coke
(i)
(ii) (Boudouard reaction)
The carbon monoxide produced in (ii) rises up and reduces the iron oxides.
Composition of molten iron (pig iron)
The iron tapped at the bottom (pig iron) dissolves a considerable amount of carbon along with traces of etc. The carbon content is roughly , the textbook average being .
Nature of exhaust (top) gas
The gases leaving the throat mainly contain (≈ 30-35 %), (from blast air, ≈ 60-65 %) and a small amount of . Oxides of nitrogen such as are not produced in any significant amount under the strongly reducing conditions of the furnace.
Option-wise verification
Option A: Limestone is used to remove silicate impurity.
Correct, because formed from limestone reacts with to give slag .
Option B: Pig iron obtained from blast furnace contains about 4 % carbon.
Correct; the molten iron indeed contains roughly carbon.
Option C: Coke () converts to .
Correct, via the Boudouard reaction which predominates between .
Option D: Exhaust gases consist of and .
Incorrect; the main constituents are and , not .
Hence the correct choices are
Option A (Limestone removes silicate impurity),
Option B (Pig iron contains ≈ 4 % C) and
Option C (Coke converts to ).
Option A, Option B and Option C are correct.
Tagged Extraction of Fe, Cu, Zn, Al, Ag and Au. Machine-assigned, so read it as a strong shortlist rather than a verdict.