In the print dialog choose “Save as PDF”. Turn off the browser’s own headers and footers; the sheet has its own.

RankRizzUNIQUE CONCEPTS

Mechanical Properties of Solids

PHYSICS · 6 IDEAS · 129 PAST QUESTIONS · JEE MAIN + ADVANCED · 2004–2026

HOW TO USE THIS SHEET

One past question per idea, most-asked idea first; each is the most recent time the examiner set it. Answer it cold. Check your answer at the address printed beside it — there is no key in this sheet. An idea here is one syllabus topic — the finest tag our past questions carry. A topic can hold more than one technique, so treat each question as the door into an idea, not the whole of it.

  1. 01Stress, strain, Hooke's law and Young's modulusset 69×

    ASKED 69× · 2006–2026, 14 DIFFERENT YEARS · THIS ONE: JEE MAIN 2026 · 06 APR S2

    Figure represents the extension (Δl\Delta l) of a wire of length 1 meter, suspended from the ceiling of the room at one end with a load W connected to the other end. If the cross-sectional area of the wire is 10−510^{-5} m2^2 then the Young's modulus of the wire is __________ N/m2^2.

    image
    1. (A)

      1.0×10111.0 \times 10^{11}

    2. (B)

      2.0×10102.0 \times 10^{10}

    3. (C)

      1.0×10101.0 \times 10^{10}

    4. (D)

      2.0×10112.0 \times 10^{11}

    CHECK IT: rankrizz.com/jee-main/physics/mechanical-properties-of-solids/q/6-apr-2026-s2-q33

  2. 02Bulk modulus and compressibilityset 20×

    ASKED 20× · 2013–2026, 12 DIFFERENT YEARS · THIS ONE: JEE MAIN 2026 · 06 APR S1

    A certain gas is isothermally compressed to (13)rd\left(\frac{1}{3}\right)^{rd} of its initial volume (V0=3V_0 = 3 litre) by applying required pressure. If the bulk modulus of the gas is 3×1053 \times 10^5 N/m2^2, the magnitude of work done on the gas is _______ J.

    Answer: ____________

    CHECK IT: rankrizz.com/jee-main/physics/mechanical-properties-of-solids/q/6-apr-2026-s1-q50

  3. 03Thermal stressset 14×

    ASKED 14× · 2012–2026, 7 DIFFERENT YEARS · THIS ONE: JEE MAIN 2026 · 24 JAN S1

    A brass wire of length 2 m and radius 1 mm at 27 °C is held taut between two rigid supports. Initially, it was cooled to a temperature of -43 °C, creating a tension T in the wire. The temperature to which the wire has to be cooled in order to increase the tension in it to 1.4T, is ____ °C.

    1. (A)

      -80

    2. (B)

      -86

    3. (C)

      -65

    4. (D)

      -71

    CHECK IT: rankrizz.com/jee-main/physics/mechanical-properties-of-solids/q/24-jan-2026-s1-q36

  4. 04Modulus of rigidity and Poisson's ratioset 10×

    ASKED 10× · 2013–2026, 8 DIFFERENT YEARS · THIS ONE: JEE MAIN 2026 · 05 APR S1

    A cube has side length 5 cm and modulus of rigidity 10510^5 N/m2^2. The displacement produced by a force of 10 N in the upper face of cube is _______ mm.

    Answer: ____________

    CHECK IT: rankrizz.com/jee-main/physics/mechanical-properties-of-solids/q/5-apr-2026-s1-q46

  5. 05Elastic potential energy in stretched wiresset 10×

    ASKED 10× · 2004–2026, 9 DIFFERENT YEARS · THIS ONE: JEE MAIN 2026 · 05 APR S2

    A copper wire of length 3 m is stretched by 3 mm by applying an external force. The volume of the wire is 600×10−6600 \times 10^{-6} m³. The elastic potential energy stored in the wire in stretched condition would be _______  J :
    (Given Young's modulus of copper =1.1×1011= 1.1 \times 10^{11} N/m²)

    Answer: ____________

    CHECK IT: rankrizz.com/jee-main/physics/mechanical-properties-of-solids/q/5-apr-2026-s2-q46

  6. 06Stress-strain curve and elastic behaviourset 6×

    ASKED 6× · 2012–2026, 5 DIFFERENT YEARS · THIS ONE: JEE MAIN 2026 · 23 JAN S1

    The strain-stress plot for materials A, B, C and D is shown in the figure. Which material has the largest Young's modulus?

    45
    1. (A)

      B

    2. (B)

      A

    3. (C)

      D

    4. (D)

      C

    CHECK IT: rankrizz.com/jee-main/physics/mechanical-properties-of-solids/q/23-jan-2026-s1-q45

Past questions are reproduced with their sitting. Not affiliated with NTA or the IITs. Every question on each idea: rankrizz.com/jee-main/physics/mechanical-properties-of-solids