In the print dialog choose “Save as PDF”. Turn off the browser’s own headers and footers; the sheet has its own.

RankRizzUNIQUE CONCEPTS

Laws of Motion & Friction

PHYSICS · 7 IDEAS · 167 PAST QUESTIONS · JEE MAIN + ADVANCED · 2004–2026

HOW TO USE THIS SHEET

One past question per idea, most-asked idea first; each is the most recent time the examiner set it. Answer it cold. Check your answer at the address printed beside it — there is no key in this sheet. An idea here is one syllabus topic — the finest tag our past questions carry. A topic can hold more than one technique, so treat each question as the door into an idea, not the whole of it.

  1. 01Newton's laws, free-body diagrams and equilibrium of a particleset 60×

    ASKED 60× · 2007–2026, 16 DIFFERENT YEARS · THIS ONE: JEE MAIN 2026 · 04 APR S2

    At t=0t = 0, a body of mass 100100 g starts moving under the influence of a force (5i^+10j^)(5\hat{i} + 10\hat{j}) N. After 22 s, its  position is (2xi^+5yj^)(2x\hat{i} + 5y\hat{j}) m. The ratio x:yx : y is ______.

    1. (A)

      1:21:2

    2. (B)

      2:52:5

    3. (C)

      5:25:2

    4. (D)

      5:45:4

    CHECK IT: rankrizz.com/jee-main/physics/laws-of-motion/q/4-apr-2026-s2-q28

  2. 02Static and kinetic frictionset 45×

    ASKED 45× · 2004–2026, 16 DIFFERENT YEARS · THIS ONE: JEE MAIN 2026

    A uniform chain of length l\ has one of its end attached to the wall a point A, while 3l4\frac{3l}{4}of the length of the chain is lying on table as shown in figure. Find the minimum co-efficient of friction between table and chain so that chain remains in equilibrium is.

    image
    1. (A)

      12\frac{1}{2}

    2. (B)

      14\frac{1}{4}

    3. (C)

      34\frac{3}{4}

    4. (D)

      43\frac{4}{3}

    CHECK IT: rankrizz.com/jee-main/physics/laws-of-motion/q/2026-physics-516364

  3. 03Connected bodies, pulleys and constraint relationsset 23×

    ASKED 23× · 2007–2026, 8 DIFFERENT YEARS · THIS ONE: JEE MAIN 2026 · 06 APR S2

    The velocity at which 6 kg mass (shown in figure) strikes the ground when it is released from a height of 6 m above the ground is __________ m/s. Assume pulley is massless and string is light and inextensible. (Take g=10g = 10 m/s2^2)

    image
    1. (A)

      7.74

    2. (B)

      7.20

    3. (C)

      6.55

    4. (D)

      4.50

    CHECK IT: rankrizz.com/jee-main/physics/laws-of-motion/q/6-apr-2026-s2-q44

  4. 04Motion on inclined planes and wedgesset 18×

    ASKED 18× · 2005–2026, 10 DIFFERENT YEARS · THIS ONE: JEE MAIN 2026 · 05 APR S1

    A wedge Y with mass of 10 kg and all frictionless surfaces and the inclined surface making 37° with horizontal. A block X with mass 2 kg is placed at the highest point of the wedge as shown in figure is at rest. At t=0t = 0 wedge (Y) is pulled toward right with constant force (ff) of 24 N. Taking the block X at rest at t=0t = 0, the time taken by it to slide down 8.8 m on the slope, while Y is on the move, is _______ s. (take tan⁡(37°)=3/4\tan(37°) = 3/4 and g=10g = 10 m/s2^2)

    image
    1. (A)

      22 

    2. (B)

      44 

    3. (C)

      2\sqrt{2} 

    4. (D)

      222\sqrt{2} 

    CHECK IT: rankrizz.com/jee-main/physics/laws-of-motion/q/5-apr-2026-s1-q30

  5. 05Friction in multi-block systemsset 8×

    ASKED 8× · 2014–2026, 6 DIFFERENT YEARS · THIS ONE: JEE MAIN 2022 · 27 JUN S1

    A system of two blocks of masses m=2m = 2 kg and M=8M = 8 kg is placed on a smooth table as shown in figure. The coefficient of static friction between two blocks is 0.50.5. The maximum horizontal force FF that can be applied to the block of mass MM so that the blocks move together will be (g=9.8(g = 9.8 m s−2)^{-2})

    1. (A)

      9.89.8 N

    2. (B)

      39.239.2 N

    3. (C)

      4949 N

    4. (D)

      78.478.4 N

    CHECK IT: rankrizz.com/jee-main/physics/laws-of-motion/q/27-jun-2022-s1-q4

  6. 06Pseudo force: lifts and accelerating framesset 7×

    ASKED 7× · 2004–2026, 6 DIFFERENT YEARS · THIS ONE: JEE MAIN 2026 · 06 APR S1

    Two blocks (P and Q) with respectively masses 2 kg and 1.5 kg are joined by a massless thread. These blocks are mounted on a frictionless pully which is fixed on the edge of a cube (S), as shown in the figure below. Block P is positioned on the top surface which has no friction and block Q is in contact with side-surface, having coefficient friction μ\mu. The cube (S) moves towards the right with acceleration of g2\frac{g}{2}, where g is gravitational acceleration. During this movement the block P and Q remain stationary. The value of μ\mu is _______.
    (take g = 10 m/s2^2)

    image
    1. (A)

      0.33

    2. (B)

      0.67

    3. (C)

      1

    4. (D)

      0.5

    CHECK IT: rankrizz.com/jee-main/physics/laws-of-motion/q/6-apr-2026-s1-q29

  7. 07Spring force and spring combinations in dynamicsset 6×

    ASKED 6× · 2005–2025, 5 DIFFERENT YEARS · THIS ONE: JEE MAIN 2025 · 23 JAN S2

    A massless spring gets elongated by amount x1x_{1} under a tension of 5 N . Its elongation is x2x_{2} under the tension of 7 N . For the elongation of (5x1−2x2)(5x_{1}-2x_{2}),the tension in the spring will be,

    1. (A)

      39 N

    2. (B)

      15 N

    3. (C)

      11 N

    4. (D)

      20 N

    CHECK IT: rankrizz.com/jee-main/physics/laws-of-motion/q/23-jan-2025-s2-q30

Past questions are reproduced with their sitting. Not affiliated with NTA or the IITs. Every question on each idea: rankrizz.com/jee-main/physics/laws-of-motion